00197443-02_IM_707_1_DE_EN.pdf - 第33页
Station S oftware 70 7.1 / Ins tallation Man ual Ausgabe 05/2014 E dition 33 5.4.7 Entering the Mac hine Identifica tion Number (MID) and serial number Figure 5- 15 : Entering the Machine Identific ation Number (MID) and…
Station Software 707.1 / Installation Manual Ausgabe 05/2014 Edition
32
5.4.5 Selecting the Machine Type
Figure 5-13: Selecting the machine type
► Select the option for the machine type for which the software is to be configured.
► Click the Next button.
5.4.6 Selecting the Hardware Configuration
The Hardwareconfiguration dialog box is opened, in which you configure the hardware for one-
computer or two-computer operation. One-computer operation is default for the SX and DX
placement machines.
Figure 5-14: "SIPLACE Setup" dialog box
► Click the One-computer-configuration button or the Two-computer-
configuration button for X-series placement machines with two computers.
Station Software 707.1 / Installation Manual Ausgabe 05/2014 Edition
33
5.4.7 Entering the Machine Identification Number (MID) and serial number
Figure 5-15: Entering the Machine Identification Number (MID) and serial number
► In the text box beside MID-Number, enter the 8-digit machine identification number.
► In the text box beside SerialNumber, enter the serial number
NOTICE
You will find the MID and the serial number on an adhesive label on the side of the
protective covers directly below the label for the number of the relevant location. The
number following the dash after the MID specifies the location and is not entered here
(e.g. 00000001-2 stands for location 2).
After upgrading (from 60x and 70x) the correct MID and serial number are already
inserted.
► Click the Next button.
Station Software 707.1 / Installation Manual Ausgabe 05/2014 Edition
34
NOTICE
The following screen only appears if applications are open which use files which must be
updated during installation of SIPLACE.
Figure 5-16: Open applications
► Close the applications or processes listed here by using Windows Task Manager and then click
the Retry button.
The installation program now installs additional programs on the machine computer.