141-400-57-probestationaccessoriescatalog.pdf_-_141-400-probestationaccessoriescatalog_1.pdf.pdf - 第49页

PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 33 Revision 57, February, 2023 Probe Station A ccessories 164 -9 17— Ai r Dryin g Uni t Feat ur es • Membr a ne air dryer ( internal purge air consumption…

PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 32

Revision 57, February, 2023 Probe Station Accessories

Miscellaneous Accessories

100422 — Textool Socket Adapter

Features

• For holding of PC boards with 50-130

mm width

• Ada pter is vacuum clamped onto chuck

Compatibility

• Vacuum chucks

100539 — Vacuum Switches for HF Chuck

Features

• Block with two vacuum switches for HF chucks

• Contr ols vacuum for calibration substrates and

burnishing pads

Specifications

• Contained in HF Kit for PA200, PM8 III, PA300

and PM300

Compatibility

• PA300, PM300, PA200, PM8, PM300PS

100605 — Inker, DPP2xx/DPP3xx

Features

• Fits positioners DPP2xx-S, DPP3xx-S.

• Can be used in combination with probe cards

• Can be used with software inker output, or a

driver unit when used with manual systems

• Includes cartridge holder

Compatibility

• DPP2x x-S, DPP3xx-S

145530 — Inker Cartridge, Markem 6990

Features

• Markem ink type 6990, color: black

• Alcohol soluble, relatively thin, flows very consistently, requires

heat curing

• After opening, the cartridge can be used for about 5 days

Specifications

• Order requires one of the fol lowing configurations to be specified:

– DM-1 5,8,10,15,20,25,30 mil

– DM-1.25 10,15,20,25 mil

– DM-S 10,15 mi l

• She lf li fe: 4 months

• Pack o f 10

157-842 — Universal DUT Board Holder

Features

• For isolated holding of PC boards

with up to 150 mm ( 6 in) width

• Adapter is vacuum clamped onto

chuck

Specifications

• Max. board thickness up to 2.5 mm (0.09 in)

• DUT will be located 20 mm above chuck top surface

• Height of DUT holder mi ght restrict chuck movement range due to

mechanical platen conflict

Compatibility

• MPS150, PM8, PA200, PM300

161-096 — Analogue Separation Drive Display for

MPS150 Universal Platen

Features

• Displays positioner platen z-height

• For use with MPS150/EPS150 universal platen

• Enables exact overtravel adjustment

Specification

• 10 µm (0.39 mils) division marks

• 1 turn = 1 mm (0.04 in)

• Adjustable 0 position

Compatibility

• MPS150 / EPS150 (universal platen)

164-486 — Analogue Separation Drive Display for

MPS150 MMWPlaten

Features

• Displays positioner platen z-height

• For use with MPS150 MMW platen

• Enables exact overtravel adjustment

Specification

• 10 µm (0.39 mils) division marks

• 1 turn = 1 mm (0.04 in)

• Adjustable 0 position

Compatibility

• MPS150 (MMW platen)

PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 33

Revision 57, February, 2023 Probe Station Accessories

164-917— Air Drying Unit

Features

• Membr ane air dryer (internal purge air

consumption 120 l/min [4.2 CFM])

• Integrated nano filter

• No electric power required

• Des igned for wall mounting

Specifications

• Dimensions (HxWxD): 805 x 100 x 81 mm (31.7 x

3.9 x 3.2 i n.)

• Input CDA requirements

– Minimum inlet pressure 7 bar/0.7 MPa/101.5 psi

– Oil-free, particle-free (<1 μm), pressure de w point < +3°C

(37.4°F)

• Outlet pressure dew point depe nding on inlet pressure, inlet

pressure dew point and flow rate

• Purge air 120 l/min (4.2 CFM)

• Requires yearly exchange of filter unit

Application Example

• Inlet pre ssure 7 bar/0.7 MPa/101.5 psi, inlet pressure dew point

+3°C (37.4°F), inlet air flow 570 l/ min (20.1 CFM)

• Outlet pressure dew point < -20°C (-4°F)

• Outlet air flow 450 l/min (15.9 CFM)

183-000 — Portable Vacuum System

Features

• Medium capacity portable vacuum

system for manual and semiautomatic

probe stations and vacuum ba sed

accessories

• Intended for facilities without house

vacuum system

Specifications

• Oil-less design, noise level typ. 45dBA

• Rated power 40W, safety class IP40, 5 kg (11 pounds)

• Air flow 11.3/14.2 l/min (0.4/0.5 CFM) (50/60Hz) @ vacuum 75 torr

• Air flow 11.7/14.2 l/min (0.4/0.5 CFM) (50/60Hz) @ vacuum 100

mbar

• Rated for 100% continuous duty

• Switchable 100-120V or 20 0-230V @ 5 0&60Hz (IEC 60320/C15

socket)

• Connector cable purchased separately

• Includes silencer

• Includes 3 m (9.8 ft) connection tube with 8 mm ( 0.3 in ) diameter

• Pump di mensions (L x W x H): 247 x 121 x 145 mm

System Compatibility

• BTS 1000, BTS 2000 , BTS-VERT

• PM5/EPS150, PM8/EPS200, PM300, Summit, PA200/PA200BR,

SUMMIT200-SA, T200/TESLA200

183-838 — Vacuum Pump Kit Including Vacuum Buffer

Reservoir

Features

• Portable vacuum system for semi- and fully-automated probe

stations (e.g., one CM300 with one MHU301)

• Intended for facilities without house vacuum system

• For standard use cas es only. In case of non-standard use cases,

an ad ditional pump kit (PN 183-000) can be added in parallel

Specifications

• Oil-less design, noise level typ. 4 5 dBA

• Rated power 40 W, safety class IP40, 5 kg

• Air flow 11.3/14.2 l/min (0.4/0.5 CFM) (50/60Hz) @ vacuum 75 torr

• Air flow 11.7/14.2 l/min (0.41/0.5 CFM) (50/60Hz) @ vacuum 100

mbar

• Rated for 100% continuous duty

• Switchable 1 00-120 V or 200-230 V @ 50&60 Hz (IEC 60320/C15

socket)

• Connector cable purchased separately

• Includes silencer

• Includes 3 m (10 ft) connection tube with 8 mm (0.3 in) diameter

• Includes 10 l vac uum buffer reservoir

• Dimensions (L x W x H):

– Pump = 247 x 121 x 145 mm

– Buffer reservoir = 558 x 162 x 195 mm

Compatibility

• CM300, T ESLA300, SUMMIT200-FA, TESLA200-FA

192-085 — Air Drying Unit

Features

• Membrane air dryer (internal purge air

consumption 150 l/min [5.3 CFM])

• Integrated nano filter

• No electric power required

• Designed for wall mounting

Specifications

• Dimensions (HxWxD): 805 x 100 x 81 mm (31.7 x

3.9 x 3.2 in.)

• Input CDA requirements:

– Minimum inlet pressure 7 bar/0.7 MPa/101.5 psi

– Oil-free, particle-free (<1 μm), pressure dew point < +3°C

(37.4°F)

PN 141-400 www.formfactor.com Lab Accessories and Miscellaneous • 34

Revision 57, February, 2023 Probe Station Accessories

• Purge air 150 l/min (5.3 CFM)

• Outlet pressure dew point depe nding on inlet pressure, inlet

pressure dew point and flow rate

• Requires yearly exchange of filter unit

Application Example

• Inlet pre ssure 7 bar/0.7 MPa/101.5 psi, inlet pressure dew point

+3°C (37.4°F), inlet air flow 390 l/ min (13.8 CFM)

• Outlet pressure dew point -45 °C (-49 °F)

• Outlet air flow 240 l/min (8.5 CFM)

M150-ACC-13 — Vacuum Manifold, Magnetic Base

Features

• 5 port vacuum manifold

• Magnet base mounts at the most

convenient location (e.g., on platen)

• For use with vacuum based positioners

or other vacuum based accessories

• Easy pu sh-pull on/off controls

Specifications

• Input connection: 3 mm (1/8 in) ID push on connector

• Output connections:1.5 mm (1/16 in) ID

Compatibility

• CM300xi, TESLA300, Elite 300, SUMMIT200, TESLA200, Summit,

T200, M150, Ales si

M150-ACC-16 — Magnetic Cable Clamp

Kit

Features

• Magnetic base cable clamp

• Ena bles easy cable routing

• Helps to minimize cable vibration that can affect measurements

• Groove in base holds cable securely

Kit Contents

• Each kit includes the necessary hardware for one cable

• Maximum cable diameter = 3 mm (1/8-inch)

• Must be used with steel base

Compatibility

CM300xi, TESLA300, Elite 300, PM300, SUMMIT200, TESLA200,

Summit, T200, M150, Ales si

M150-ACC-18 — Pin to Banana Interface Kit

Features

• Six port pin jack to banana jack interface

with magnetic base

• Used with unshielded probes (e.g., MMP-

01 or 139-332) to convert to a banana

style output

• Magnet base enables convenient placement b ased on your

positioner locations

Kit Contents

• One 6 port interface

Compatibility

• CM300xi, T ESLA300, Elite 300, PM300, SUMMIT200, TESLA200,

Summit, T200, M150, Alessi

M150-ACC-19 — Triax Panel, Magnetic Base

Features

• Triax connection panel for

convenient cable management

• Magnet base enables convenient

placement based on your positioner

location

• 10 Triax (3-lug) feed through

connectors (female)

• Panel connections su pport single triax cables and Keysight dua l

triax SMU cable assemblies. For Keysight Quadrax SMU

connections, please contact the factory.

Kit Contents

• Magnet base connection panel

• Ground strap

Compatibility

• CM300xi, T ESLA300, Elite 300, PM300, SUMMIT200, TESLA200,

Summit, T200, M150, Alessi

M150-ACC-28 — Coax Panel, Magnetic Base

Features

• Coxial connection panel for convenient

cable management

• Magnet base allows for convenient

placement based on you r positioner

location

• 10 Coaxial feed through connectors

(female)

Kit Contents

• Magnet base connection panel