00192791-02.pdf - 第59页
User Manual 2 Ceramic Substrate Centering Unit Software Version S R.502.xx 01/01 Issue 2.8 Configuration Ceramic Subs trate Centering 59 &RQILJ XUDWLRQ &HUDPLF 6XEVWUDWH&HQWHULQJ 2Y HUY LHZ The s…
2 Ceramic Substrate Centering Unit User Manual SIPLACE HS-50
2.7 Screen "Conveyor Functions" Software Version SR.502.xx 01/01 Issue
58
$FWLYDWHWKH&ODPSLQJ
With the help of this function, which may be found in the fields "Processing area 1"and "Processing
area 2", you can check the function of the PCB clamping (lifting table moves upward / downward)
in the processing conveyors in question.
When the mechanical ceramic substrate centering unit has been installed and activated this
function is only possible if the unit is "open", i. e., inductive proximity switch of the ceramic sub-
strate centering unit ist signalling "1".
For the test of the clamping, it is not necessary to have a PCB in the conveyor (input). However if
a PCB was transported to the processing area, the clamping unit will open in response to the initial
activation.
:LWKRXW
a PCB the steps taken are as follows:
Å Click on the button"
$FWLY DWHWKHFODPSLQJ
in the field "Processing area 1".
The PCB clamping closes (lifting table moves upward).
Å Once again, click on the button "
$FWLY DWHWKHF ODPSLQJ
.
The clamping opens (lifting table moves downward).
Å In "Processing area 2" check the PCB clamping in the same manner.
User Manual 2 Ceramic Substrate Centering Unit
Software Version SR.502.xx 01/01 Issue 2.8 Configuration Ceramic Substrate Centering
59
&RQILJXUDWLRQ&HUDPLF6XEVWUDWH&HQWHULQJ
2Y HUYLHZ
The software SR V 502.xx is required to utilize the mechanical ceramic substrate centering unit
on HS-50.
In principle, using the mechanical ceramic substrate centering unit and/or the SW V502.xx is in-
dependent of the existing version of the conveyor control (TSP 100 / TSP 200).
However, when the option "Mechanical ceramic substrate centering HS-50" was to retrofitted, a
setup change was always made from TSP 100 to TSP 200.
Although the optional "Mechanical Ceramic Substrate Center Unit" with completely installed hard-
ware is automatically recognized due to the coding plug on the HS-50, it must be activated in
SITEST anyway.
On the HS-50, mechanical ceramic substrate centering is always combined with recognition of the
position of fiducials on the substrate.
Here, position is recognized with the PCB camera with normal illumination or with the optional ob-
lique illumination. If the machine is already fitted with the PCB camera multicolor, the fiducials are
always centered with this camera, as standard. In this case the optional oblique illumination is
eliminated.
Please note:
– If the hardware of the mechanical ceramic substrate centering is installed, it MUST be ACTI-
VATED in the menu "Machine configuration".
– If the mechanical ceramic substrate centering in the menu "Machine configuration" is deacti-
vated, the hardware MUST first be removed complete in BOTH processing areas of the perti-
nent conveyor, i.e., the plug-in connections of the option must also be unplugged on the
conveyor control.
In parallel, the conveyor assemblies must be converted to transport the PCBs.
2 Ceramic Substrate Centering Unit User Manual SIPLACE HS-50
2.8 Configuration Ceramic Substrate Centering Software Version SR.502.xx 01/01 Issue
60
$FWLYDWLRQDQG&RQILJXUDWLRQRI&HUDPLF6 XEV WUDW H&HQWHULQJ
Å Start the SITEST program.
Å Select "Settings" in the menu bar.
Å In the menu "Machine configuration" select the option "Ceramic substrate centering
" (= pro-
cessing range 1 and 2) -> "Edit".
The "Edit" window is indicated, as follows: