NPM Calibration Manual-En.pdf - 第11页

NPM Maint en anc e E di ti on 9.3 Pl ane Com pensati on XY Page 9-10 EJM9BE-M B-09M-21 15 Press . • W hen exiti ng t his s cr een to t he other one, you are al ways prompt ed t o sa v e the dat a. ∗ To sav e the data obt…

100%1 / 99
NPM
Maintenance Edition
9.3 Plane Compensation XY
EJM9BE-MB-09M-21 Page 9-9
12
Press [OK].
13
Press + [PlaneCorrXY].
•
The calibration on the front side is carried out,
followed by that on the rear side.
14
Check that it is successfully complete.
UnitCalibAxisSurface-04E00
12
UnitCalibAxisSurface-05E00
13
UnitCalibAxisSurface-06E00
14
NPM
Maintenance Edition
9.3 Plane Compensation XY
Page 9-10 EJM9BE-MB-09M-21
15
Press .
•
When exiting this screen to the other one, you
are always prompted to save the data.
∗
To save the data obtained by the calibration,
press [Yes].
•
If you press [No], the return-to-origin process
is carried out and the data obtained by the
calibration are lost.
•
After the above operation, the next screen is
displayed.
16
Press + [OK].
•
The head moves to the retraction position.
17
Turn OFF the servo switch.
18
Open the safety cover.
UnitCalibAxisSurface-07E00
15
UnitCalibAxisSurface-08E00
16
NPM
Maintenance Edition
9.3 Plane Compensation XY
EJM9BE-MB-09M-21 Page 9-11
19
Transfer the plane-compensation jig
to the downstream machine or the
downstream conveyor by hand.
20
Remove the plane-compensation jig.
21
Close the safety cover.
22
Turn ON the servo switch.
23
Press [OK].
•
The screen selected in step 15 is displayed.
UnitCalibAxisSurface-09E00
23