NPM Calibration Manual-En.pdf - 第25页

NPM Maint en anc e E di ti on 9.6 Pl ac ement Positi on / Conveyor Page 9-24 EJM9BE-M B-09M-21 19 Attach the nozz le. 12-nozz l e head ∗ Att ach the 230CS noz zle t o the nozzle posit ion 4. 8-nozz l e head ∗ Att ach the…

100%1 / 99
NPM
Maintenance Edition
9.6 Placement Position / Conveyor
EJM9BE-MB-09M-21 Page 9-23
15
Press [OK].
16
Press + [Measure height].
•
The head moves to the working position.
17
Turn OFF the servo switch.
18
Open the safety cover.
UnitCalibConveyorPCBPos-03E01
15
UnitCalibConveyorPCBPos-04E01
16
NPM
Maintenance Edition
9.6 Placement Position / Conveyor
Page 9-24 EJM9BE-MB-09M-21
19
Attach the nozzle.
12-nozzle head
∗
Attach the 230CS nozzle to the nozzle
position 4.
8-nozzle head
∗
Attach the 230C nozzle to the nozzle position
3.
2-nozzle head
∗
Attach the No.1003 nozzle to the nozzle
position 2.
20
Close the safety cover.
21
Turn ON the servo switch.
22
Press + [OK].
•
The calibration is carried out.
UnitCalibConveyorPCBPos-05E01
22
NPM
Maintenance Edition
9.6 Placement Position / Conveyor
EJM9BE-MB-09M-21 Page 9-25
23
Check that it is successfully complete.
24
Press + [Jig remove].
25
Press + [OK].
26
Turn OFF the servo switch.
27
Open the safety cover.
28
Detach the nozzles.
29
Close the safety cover.
30
Turn ON the servo switch.
31
Press + [OK].
UnitCalibConveyorPCBPos-07E01
25
UnitCalibConveyorPCBPos-08E01
31
UnitCalibConveyorPCBPos-06E01
24
23