M6_ServiceManual_e.pdf - 第54页
3 Mechanical Section 3-24 Recommended grease-gun and Grease XY Ball screw Recomm ended grease: NSK LR3 80g (K48-M3856-000) Reference XY Linear Guide Recomm ended grease: THK AFA 70g （ LG0-M86A3-000 ） THK AFB 70G (LG0-M86…
3 Mechanical Section
3-23
Y-axis Linear Guide
The following pictures are viewed from the front. You can find two Y-axis linear guides at right and left,
and each linear guide has two slide blocks.
Y-axis linear guide
Y-axis slider
Grease gun (H-shape)
Right
Left
3 Mechanical Section
3-24
Recommended grease-gun and Grease
XY Ball screw
Recommended grease: NSK LR3 80g (K48-M3856-000)
Reference
XY Linear Guide
Recommended grease: THK AFA 70g （LG0-M86A3-000）
THK AFB 70G (LG0-M86A4-000)
Grease gun set MG70 (with accessory nozzles): THK LG0-M86A1-000
Recommended Nozzle (Separately sold)
NSK HGP NZ3 （LC8-M86A1-000）
10-7mm dia.
High-strength nozzle
Grease gun set: MG70 (with accessory nozzles): THK LG0-M86A1-000
Recommended nozzle:
Accessory H-shape nozzle
Grease gun set: MG70 (with accessory nozzles): THK LG0-M86A1-000
These attached 6mm diameter of
pipe and nozzle are
NOT RECOMMENDED because
the strength is not enough.
Accessory U-shape pipe + N-shape nozzle
3 Mechanical Section
3-25
Head Assembly: Z-axis ball screw and Linear guide
・Be sure the mounter is
power off state.
・Move all the head to
the upper ends
manually.
・Lubricate the grease to
the ball screws and
the linear guides.
・Move the heads
between upper-end
and lower-end a few
times manually.
・Wipe off excessive oil
at the lower end.
Scan Camera: S-axis ball screw and Linear guide
Be sure the mounter is power off
state.
・Lubricate the ball screw through
the cover window.
・Lubricate the linear guide rail.
・Move the linear guide rail from the
left-end to the right end a few
times manually.
・Wipe off excessive grease.
Recommended grease: THK AFA 70ｇ（LG0-M86A3-000）
THK AFB 70ｇ（LG0-M86A4-000）
Dip a brush or a torsion brush in grease, and lubricate ball screws and
linear-guide grooves.
Z-axis linear guideZ-axis ball screw
Recommended grease: THK AFA 70ｇ（LG0-M86A3-000）
THK AFB 70ｇ（LG0-M86A4-000）
Dip a brush or a torsion brush in grease, and lubricate ball screws and
linear-guide grooves.
S-axis linear guide
S-axis ball screw
Viewed from the rear