1OM-1603-006_w.pdf - 第146页

1OM-1603 3-21 2. Pattern Program Change : Chap.3 2.2.6.2 T ape Feeder Detachment Procedure (1) Conrm that the tape feeder operation has been stopped. (Make sure that the tape feeding or cover tape taking-up operation is…

1OM-1603

3-20

2. Pattern Program Change : Chap.3

(2) Attach the tape feeder power connector socket onto the main machine.

Tape Feeder Power Connector Socket

F1C13-4

(3) Connect the tape feeder connecting cable that has been attached to the main

machine with a magnet, to the tape feeder with the bracket turned down.

(One second after it is connected, the components can be reloaded or the

machine can be adjusted).

Connect it with

the bracket turned down.

F1C13-5

CAUTION

When the tape feeder connecting cable is connected

to the tape feeder, unless the tape feeder is held

securely, the tape feeder holding guide may come

off and drop from the tape feeder unit. Connect the

cable with the tape feeder held securely.

1108-001

1OM-1603

3-21

2. Pattern Program Change : Chap.3

2.2.6.2 Tape Feeder Detachment

Procedure

(1) Conrm that the tape feeder operation has been stopped.

(Make sure that the tape feeding or cover tape taking-up operation is

stopped).

(2) Remove the tape feeder connecting cable from the tape feeder and attach it

onto the main machine using a magnet.

F1C13-6

(3) Remove the tape feeder from the tape feeder holding guide and attach it onto

the bank feeder change cart.

CAUTION

There are some heavy feeder models. When such

feeders are removed with one hand, the weight of the

feeder removed from the guide cannot be supported

by one hand and the feeder might drop. Remove the

feeder using both hands to support it.

1108-001

1OM-1603

3-22

2. Pattern Program Change : Chap.3

1108-006

2.3 Program Change Operation

2.3.1 Selection of Run Mode

Set the "Run Mode" on the "Run Mode" tab sheet in the "OPERATION" window.

Normally, select "Place".

F1C14

Procedure

(1) Press the [Run Mode] tab on the "OPERATION" window.

(2) Press the [Place] button on the "Run Mode" tab sheet.

Graphic

Development