OM-1683-001_w.pdf - 第10页
Safe-1 OM-1683 Safety Precautions 1 103-001 "Safety Precautions" describes the precautionary items that should be kept to prevent personal injury or property damage beforehand and use the machine safely . Befor…
6
OM-1683
AboutSpecicationChange
Consult the marketing department or sales agency of Hitachi High-Technologies for
desired changes of the machine specications.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modication made without any prior notice in a written form.
About Disposal of Machine
Strong permanent magnets are used in the moving mechanisms of the X- and Y-axis linear
sections.
The disposal of the machine in whole or part must be distinguished from wastes of the
common man's living.
Contact the marketing department or sales agency of Hitachi High-Technologies for the
detailed information on the machine disposal.
Other Precautionary Items
Trade Marks and Registered Trade Marks
Windows is a registered trademark of the Microsoft Corporation in the United
States and other countries.
All other corporate and product names in this manual are owned by and are the
trademarks or registered trademarks of their respective companies.
Neither (TM) nor (R) marks are described clearly in this manual.
1103-001
Safe-1
OM-1683
Safety Precautions
1103-001
"Safety Precautions" describes the precautionary items that should be kept to prevent
personal injury or property damage beforehand and use the machine safely.
Before using this machine, please understand the contents of the following safety
precautions.
1. About Safety Precaution Labels
The safety precautions are expressed, using the combinations of safety alert symbols
"
" and headwords such as "DANGER", "WARNING", or "CAUTION" according to
the degree of danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols "
" are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
DANGER
This indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word is
limited to the most extreme situations.
WARNING
This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Aprecautionaryitemidentiedas"
CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
NOTICE
This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
1. About Safety Precaution Labels
Safe-2
OM-1683
Safety Precautions
1103-001
2. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " "
Alert Description Related Items
Only a well-trained service person should perform maintenance
tasks
carefullythroughthespeciedprocedures.
13.1.1
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
13.1.1
Alert Indications described as " "
Alert Description Related Items
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside
themachine.Avoidhandandngerinjuries.
7.1
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
13.1.1
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF".
13.1.1
2. Alert Indications in Instruction Manual
WARNING
CAUTION