OM-1683-001_w.pdf - 第50页

33 OM-1683 1 103-001 13.3 Maintenance Spots 13.3 Maintenance Spots 13.3.1 Whole View Notice Any operations with a cover(s) being removed are included. After the maintenance work, be sure to attach the cover . Feeder Cart…

100%1 / 83
32
OM-1683
1103-001
13.2 Maintenance Check List
13.2 Maintenance Check List
The periodic maintenance items (inspection, cleaning, lubrication, etc.) are
classied and described based on how frequently each item should be performed.
Use the tables below as check lists.
Reference
Refer to "13.3 Maintenance Spots" for the spots to be maintained.
13.2.1 Weekly Maintenance
Table 6
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
13.3.2.1 PCB
Positioning
Section
Upper Surface of Feeder
Base
Cleaning
----- Vacuum Cleaner
13.3.2.2 Conveyor
Section
Support Pin Detection
Sensors
Cleaning
----- Rag
PCB Detection Sensor,
PEC Detection Sensor
Fiber
PCB Detection Sensor
Mirror
Cleaning
----- Rag
13.2.2 Quarterly Maintenance
Grease Symbols
DE1 : DAPHNE EPONEX GREASE No. 1
Notice
Lubrication must be made on the *-marked items after initial month and
every 3 months for the subsequent use.
Table 7
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
13.3.2.1 PCB
Positioning
Section
* Ball Screw
Cleaning,
Lubrication
DE1 Rag
13.3.2.2 Conveyor
Section
* Linear Guide
Cleaning,
Lubrication
DE1 Hand Grease Gun
Type H
13.2.3 Half-Yearly Maintenance
Grease Symbols
DE1 : DAPHNE EPONEX GREASE No. 1
Table 8
Object Unit
Inspection, Cleaning,
and Lubricating Spots
Work Grease Required Tools Check
13.3.2.1 PCB
Positioning
Section
Ball Screw
Splines
Cleaning,
Lubrication
DE1 Oiled Rag,
Hand Grease Gun,
SPK-3C
33
OM-1683
1103-001
13.3 Maintenance Spots
13.3 Maintenance Spots
13.3.1 Whole View
Notice
Any operations with a cover(s) being removed are included.
After the maintenance work, be sure to attach the cover.
Feeder Cart Section
Air Source
Vacuum System
Front View of Machine
Fig. 29
Reference
Refer to "13.3.2" and the subsequent items for the detailed information on the
spots of each section to be maintained and how to maintain them.
34
OM-1683
1103-001
13.3 Maintenance Spots
13.3.2 Inspection, Cleaning, and Lubrication stops
13.3.2.1 PCB Positioning Section
Ball Screws
Ball Screws (2 Places)
Every 3 Months Cleaning and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
Wipe off old grease with a rag and apply new
one with a syringe.
Take ample care not to leave any
waste threads after cleaning.
Grease should be applied every 3 months after
the initial month.
Use No. 19 (brown) nozzle.
No. 19
Ball Screw Splines
(Grease Nipple 6 places)
Every 6 Months Cleaning and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
(1) Wipe off old grease with an oiled rag.
(2) Attach the SPK-3C attachments to a hand
grease gun and supply new grease to the
grease nipples with the hand grease gun.
Take ample care not to leave
any waste threads after
cleaning.
Notice
SPK-3C
Upper Surface of Backup Table
Every Week Cleaning
Required Time: 2 minutes
Remove foreign substances and unrequired components
and suck dirt and dust with a vacuum cleaner.
Notice
Note
Fig. 30