OM-1683-001_w.pdf - 第5页
2 OM-1683 1 103-001 Identifying Icons in Manual Notice This icon shows an important precautionary or a regulatory item. Note This icon shows the descriptions for correct operations of the machine. Reference This icon sho…
1
OM-1683
Before Use
We are grateful to you for purchasing this products.
This instruction manual describes the functions, handling, and operations of the machine
for those who have nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
1103-001
2
OM-1683
1103-001
Identifying Icons in Manual
Notice
This icon shows an important precautionary or a regulatory item.
Note
This icon shows the descriptions for correct operations of the machine.
Reference
This icon shows the items to be referred to.
Procedure
This icon shows the operation procedures.
3
OM-1683
Caution and Warning
Limited Warranty
Hitachi represents and warrants the following based on the specications in the instruction
manual as long as this machine is used in accordance with the provided instructions.
(1) Coverage
Should the machine fail or malfunction because of a manufacturing defect in
materials or workmanship, we will repair it free of charge.
(2)
Warranty Period
The machine is warranted in normal use for a period of one year (not later than
twelve months) from the date of installation.
(3)
Warranty Exclusions
This warranty does not apply in the following cases even within the warranty
period.
(a)
Damage caused by failure to provide the specied suitable installation,
operating environment, or maintenance for the machine.
(b)
Damage caused by failure to use the specied power source (voltage and
frequency), including abnormal power supply.
(c)
Damage caused by pipe corrosions and deterioration due to impurities mixed
into the air supplied by the customer.
(d) Damage caused by corrosions in electrical circuits and deterioration of
optical elements due to ambient air mixed with strong corrosive gas.
(e) Damage caused by hardware, software, and auxiliaries that are not provided
by us.
(f) Damage caused by failure to handle or maintain the machine properly.
(g) Damage caused by any repair work performed by any party other than the
servicing company approved by us.
(h) Damage caused by failure to move or transport the machine properly after
installation.
(i) Damage caused by unapproved disassembly, modication, or machine
transfer to another place.
(j) Damage caused by a Force Majeure such as, but not limited to, re,
earthquake, storm, ood, lightning, strike, labor dispute, riots, crimes,
terrorism, war, radioactive contamination, toxic substance, or any other
incident beyond our reasonable control.
(k) Damage caused by a computer virus.
1103-001