YC8_Ope_E.pdf - 第90页

2-40 2  asic operation n When using tray components 6 Set the "F eeder T ype" parameter . Select "Auto TC" from the drop-down lis t. [Parts]-[Basic] screen "Feeder T ype" parameter "Fe…

100%1 / 122
2-39
2
asic operation
n
When using tape components
6
Set the "Tape Type" parameter.
Double-click the "Tape Type" parameter field and select the tape type from the drop-down list.
The "Tape Type" parameter changes as the "Package" parameter is changed, so set it to the correct
setting.
[Parts]-[Basic] screen
"Tape Type" parameter
"Tape Type"
24224-N8-00
n
NOTE
This parameter does not appear when "Reference of feeder pitch" is set to "Feeder setup".
7
Set the feed pitch.
Double-click the "Pitch Index" parameter field and select the correct feed pitch from the drop-down list.
[Parts]-[Basic] screen
"Pitch Index" parameter
"Pitch Index"
24225-N8-00
2-40
2
asic operation
n
When using tray components
6
Set the "Feeder Type" parameter.
Select "Auto TC" from the drop-down list.
[Parts]-[Basic] screen
"Feeder Type" parameter
"Feeder Type"
24226-N8-00
2-41
2
asic operation
5.2 Operation check
n
Checking the feeder operation
1
Open the feeder screen.
Press the [Unit] button and then select the [Feeder] tab to open the feeder screen.
2
Select the feeder and check the operation.
1. From the feeder layout diagram or feeder list, select the feeder to check the operation.
2. Press the [Feed] button on the lower right of the screen to check whether tape is fed correctly.
Feeder screen
Selecting the feeder
Feeder list
Feeder layout diagram
[Feed] button
24227-N8-00
n
NOTE
When a feeder with a pitch of 4mm or more is installed, check the top component and its position.
n
Checking the tray changer operation
1
Open the tray changer screen.
Press the [Unit] button and then select the [Auto TC] tab to open the tray changer screen.
2
Extract a pallet from the tray changer.
Press the [Pallet Set] button to check whether a pallet is correctly extracted from the tray changer.
Tray changer screen
Selecting a pallet
[Pallet Set]
button
Enter a pallet number
24228-N8-00