00194716-04_AI_Abwurfbehaelter_Abfrage_X-D3_de_en.pdf - 第72页
Installation Fitting and Connecting the 1 Wire Hub Fitting on the Component F eed Device 72 Option Verify Reject Bin Option Abfrage Abwurfbehälter 3.3 Fitting and Connecting the 1 Wire Hub The 1-Wire -Hub is us ed to con…
Installation
Circuit Diagram for Sensors with CAN Nodes Connecting the Sensors to the CAN Nodes
Option Verify Reject Bin Option Abfrage Abwurfbehälter 71
3.2.1 Circuit Diagram for Sensors with CAN Nodes
Circuit diagram for component feed device with CAN nodes for cutter
1 CAN nodes 2 Cable: nozzle changer control
W1: nozzle changer row 1
3 Cable: reject bin sensors X2*q 4 Cable: nozzle changer control
W2: nozzle changer row 2
5 Cable: solenoid valve for nozzle station
Installation
Fitting and Connecting the 1 Wire Hub Fitting on the Component Feed Device
72 Option Verify Reject Bin Option Abfrage Abwurfbehälter
3.3 Fitting and Connecting the 1 Wire Hub
The 1-Wire-Hub is used to control the following options up to SW605:
▪ Verify reject bin sensors
▪ Nozzle changers for C&P20, C&P6 and C&P12
If one of these two options is already fitted at the relevant location, an additional 1-Wire-Hub is not re-
quired.
If the 1-Wire-Hub is to be fitted in a one gantry placement area, you may need to loosen the component
feed-in device at location 2 and 4 and pull this slightly out of the machine. Please read the latest service
manual for the relevant machine prior to this.
3.3.1 Fitting on the Component Feed Device
CAUTION
Component feed device - heavy machine component
The COT insert is heavy. You may need to enlist the help of a second person.
Fixing the mounting bracket for 1 wire hub
1. 1-Wire-Hub module CAT5 [03041473-xx]
2. Mounting bracket [03023039-xx]
3. DIN912-M3x6-A2-70 [00201463-xx]
► Screw the 1-Wire-Hub to the mounting bracket (2x
M3x6).
Assembly 1 wire hub
1. 1 wire hub module CAT5 [03041473-xx]
2. Mounting bracket [03023039-xx]
3. Control cable for nozzle changer
4. DIN7981 ST3.5x6,5 - C-H-A2 [03046777-xx]
5. Patch cable: 1 wire distributor - 1-Wire-Hub CAT5
6. Connection for verify reject bin cable
► Fix the mounting bracket (with the 1-Wire-Hub fas-
tened to it) to the docking unit.
Installation
Fitting on the Component Feed Device Fitting and Connecting the 1 Wire Hub
Option Verify Reject Bin Option Abfrage Abwurfbehälter 73
LAN cable routing
1. Patch cable: 1 wire distributor - 1-Wire-Hub CAT5
2. Recesses on the machine base
► Unthread the patch cable (X1*q) from the machine
frame and run it to the 1 wire hub. Fix the cable into
place with suitable ties or similar.
Connecting the sub connector to the 1 wire hub
1. Patch cable: 1 wire distributor - 1-Wire-Hub CAT5
2. 1 wire hub module CAT5 [03041473-xx]
3. Connection for verify reject bin cable
► Connect the patch cable to the 1 wire hub.
► Connect the sub D connector x2*q to the 1 wire hub
and screw tight.