a2-100-en(v3_0).pdf - 第4页

A2 Automatic Dispenser V3 .0 2 2. Specifications T ype ： A2 Model ： A2-100%/Hummin gbird Item Content Item Content Number of Ca nisters 16/14/12/10 Min Dispensing 100%-0.077m l （ 1Y/384 ） Humm ingbird-0.015ml(1y/2000)) M…

100%1 / 18
A2 Automatic Dispenser V3.0 1
1. Using Requirements
1) Please read the manual carefully before installation and operation.
2) Working environment temperature: 0℃～+55℃, relative humidity: 15%～90%. Transformation and storage
temperatures shall be within a range of -10 ℃ to +55 ℃ and for short periods not exceeding 24h at up to
+60 ℃
3) The machine is for indoors use only.
4) The machine is not explosion-proof, neither the machine as a whole nor its internal components are intended
for use in potential explosive atmospheres.
5) Do keep the children away from the machine. Do not operate the machine except for the staff
6) Do provide separate power supply socket and overcurrent protection device for this machine. Make sure the
loading capacity of the socket shall be in line with the requirements listed in the Nameplate. Please provide
every single phase at least 1.5mm² power supply wire for this machine.
7) Please confirm that there is dependable ground wire with the electrical socket before usage
8) Before installation and maintenance, must cut off the power supply and Unplug from outlet.
9) Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord
10) Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped
or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair,
or electrical or mechanical adjustment.
11) Do not lengthen the power line at pleasure in case of accident
12) Keep this machine on the solid ground, then adjust the foundation to make the foundations on a horizontal
status before working
13) Do not operate the machine in case the machine shell is removed.
14）Computer Composition：
1
CPU PIII
2
CD-ROM Driver
3
15 Inches Monitor, screen resolution is 1024X768 pixels or
higher
4
USB/COM Interface
5
Windows 2000 or higher Operating System
A2 Automatic Dispenser V3.0 2
2. Specifications
Type：A2 Model：A2-100%/Hummingbird
Item
Content
Item
Number of Canisters
16/14/12/10
Min Dispensing
Hummingbird-0.015ml(1y/2000))
Max Flow Rate
0.60ltr/min
Canister Size
Pump Size
62mltr
Stirring Speed
Power
≤100W
Power Supply
Can Size
(D x H)
MAX 320mm x 400mm
MIN 80mmX100mm
Stirring Timing
Noise Level
＜70dBA
Weight：
Machine Size (Height x Width x Depth)
1300X710X840（mm）
Notes：Stirring time is available for customerization
3. Safety Instructions
1. Please read this manual carefully before installation and operation.
2. Only trained professionals are allowed for operation and/or maintenance.
3. Prolonging wire is prohibited.
4. The machine is only available for 0.5 liter to 20 liter (40kg) paint cans.
5. The machine should be powered on all the time to make the stirring available.
6. The side door shall be closed prior to close the top cover.
7. Press the emergency stop button, the machine will stop working and the stirring will stop at the same time.
8. If it is not used for a long time, the canisters should be cleaned and plugged off.
9. During transportation, the machine should be leveled, preventing from being shocked, pressed, and bottomed
up or side faced on the ground. The machine should be kept in ventilated and dry room which is
moisture-proof fire-proof.
10. It is forbidden to work the machine in the inflammable and explosive environment.
11. No hot-plug of the serial port line.
A2 Automatic Dispenser V3.0 3
Fig 4.2
Fig 4.1
Fig 4.2
4. Machine Composition
Canister Assembly：container of colorant is with piston pump and valve,
on the valve there is a valve handle and a nozzle for colorant dispensing.
1. Do not make the added colorant exceed the maximum volume of
the canister. See the label on the canister.
2. Keep the nozzle clean.
3. The plastic lid of the canister shall be properly covered to prevent dryness.
Turntable assembly：canisters are fixed on the turntable, which can be turned to send the canisters to
dispensing position, stirring inside canisters also can be carried out while turning. Stirring avoids the
Washing Assy
Canister Assy
Lifting Assy
Loading Plate
Canister Assy
Dry-wet
Combination
Cleaning Assy
Max
Level
Fig 4.3
Fig 4.4