00196715-01_IM_SSW_704_DE_EN.pdf - 第53页

Installation Manual, Station Software Version 704.01 04/2010 Edition 8 Uninst alling the SIPLACE sof tware Note : You must be logged in as administr ator to uninstall the software. → Open the Start menu and choose Progra…

Installation Manual, Station Software Version 704.01 04/2010 Edition

7.8 Storing calibration data in the EEPROM

In order to use the fast head exchange feature, the head specific calibration data has to be stored in the

EEPROM after upgrading from station software 701.xx. For placement heads with no head specific

calibration data stored within the EEPROM, the available data on the station computer will be stored in the

EEPROM of the respective placement head as follows.

Requirement:

- The eSW versions have been updated.

Abb. 7-9: Storing calibration data in the EEPROM

→ Perform the highlighted function for each placement head.

Note:

After the storing calibration data step, the message "37200 Changed heads detected"

should disappear. Otherwise you will have to reboot the machine. If the message still is

displayed after rebooting, please inform the Siemens Service.

52 of 60

Installation Manual, Station Software Version 704.01 04/2010 Edition

8 Uninstalling the SIPLACE software

Note:

You must be logged in as administrator to uninstall the software.

→ Open the Start menu and choose Programs Æ SIPLACE Æ SIPLACE Uninstall.

Fig. 8-1: Starting uninstallation (alternative 1)

Or:

→ Open the Start menu and choose Settings Æ Control Panel.

→ Double-click Add/Remove Programs.

53 of 60

Installation Manual, Station Software Version 704.01 04/2010 Edition

Fig. 8-2 Starting uninstallation (alternative 2)

→ Select SIPLACE from the list of installed programs.

→ Click the Change/Remove button.

Fig. 8-3 Removing a program

→ Click Next.

54 of 60