00193888-0402_AI_LBO_HFXD3_DE+EN.pdf - 第33页
Long board 2 Assembly instructions: Long board opt ion - SIPLACE HF-series / X-series / D3 02/2007 Edition 33 2.5.2 Work in processing area 2 : Remove the cover over the conversion board (6 screws). 2 2 : Remove the prot…
2 Assembly instructions: Long board option - SIPLACE HF-series / X-series / D3 Long board
02/2007 Edition
32
2.5 Assembly
: Switch the placement machine off at the main switch.
: Remove the lifting table beds in both processing areas (on SC: 2, on DC: 4).
: Start the installation in processing area 2.
2.5.1 Removing of a bothering screw
: Remove the screw shown in the photo below from the transport. It bothers the moving area of
the transport with long board option.
The screw is not necessary fot the stability of the transport.
2
Remove screw
Long board 2 Assembly instructions: Long board option - SIPLACE HF-series / X-series / D3
02/2007 Edition
33
2.5.2 Work in processing area 2
: Remove the cover over the conversion board (6 screws).
2
2
: Remove the protective cover over the cable duct.
2
2
: Open the cable duct.
2
2
Protective cover over cable duct
2 Assembly instructions: Long board option - SIPLACE HF-series / X-series / D3 Long board
02/2007 Edition
34
: Pull the connecting cable and the hose (on DC: 2 cables, 2 hoses) through the opening in the
corner of the conveyor assembly tray.
2
Fix the cable and hose from the unit to the corner of the assembly tray using cable ties, ideally at
the bottom on the floor of the assembly tray so that the width adjustment unit can move over them
without touching.
With the dual conveyor, it is very important to remember that there are 2x sets of cables and hose,
and both have to be fixed. 2
2
2
2
The unit must be attached to the stationary conveyor side wall and the switch actuator to the mov-
ing side wall. 2
2
: Connect the connector on the unit to the connecting cable.
: Connect the hose to the quick-release coupling on the unit.
2
2
2
2
2
2
Run cables and connectors through
the corner and fix with cable ties.