ET8383-說明書(英文).pdf - 第13页
9 3.2.2 Four-pi n Socket Instruction The fol lowing lis t describes the function o f 4- pin socket, it is connected t o key box. 4-pin sock et Pin NO. Pin’s name Instruction of pins Remark 1 Min4 Mai n inputting 4 si gna…
8
Ⅲ.Connection and Use
3
.1 Connection
1. 5-pin s
ocket: spare socket, 3.2.3 Five-pin Socket Instruction.
2. D
B37port: spare output port, refer to 3.3 Instruction about DB37 socket.
3. DB9port: spare output port, refer to 3.4 Instruction about DB9 socket.
4. 7-pin s
ocket: connect to dispensing controller, refer to 3.2.4 Seven-pin Socket Instruction.
5. 4-pin s
ocket: connect to key box, refer to 3.2.2 Four-pin Socket Instruction.
6. 5-pin socket: connect to nozzle position correction device, 3.2.3 Five-pin Socket Instruction.
3
.2 I/O Socket Instruction
3.2.1 Circuit Instruction of I/O Socket
1 2
3
4
5 6
9
3.2.2 Four-pin Socket Instruction
The fol
lowing list describes the function of 4-pin socket, it is connected to key box.
4-pin socket Pin NO.
Pin’s name
Instruction of pins Remark
1
Min4
Mai
n inputting 4 signal
It’s used to connect to “start/pause”
button.
2
GND
Powe
r supply “-” Power supply “-”
3
Min1
Main inputting 1 signal It is used to reset (ORG) signal
4
EMST
Em
ergency stop button
It is used to emergency stop
button.
N
OTE: * If the customers need special function, the input and output signal can be set again.
3.2.3 Five-pin Socket Instruction
The following list describes the function of 5-pin socket, it is a spare socket.
5-pin socket Pin NO.
Pin’s
name Instruction of pins Remark
1 24V
DC “+” power supply
2 G
ND Power supply “-”
3 Mi
n3 Main inputting 3 signal
Safety signal ,such as safety
light curtain \safety door etc.
4 Ein13 Exter
nal input 13 signal
5 Ein14 External input 14 signal
The following list describes the function of 5-pin socket, it’s used to light house.
10
5-pin s
ocket Pin NO.
Pin’s nam
e Instruction of pins Remark
1 24V
DC Power supply“+”
2 0V Pow
er supply“-”
3 Ein9 X
Axis X Axis home sensor signal
4 Ein10 Y
Axis Y Axis home sensor signal
5
Eout9
Enable
Enable ca
libration signal
N
OTE: * If the customers need special function, the input and output signal can be set again.
3.2.4 Seven-pin Socket Instruction
The fol
lowing list describes the pins function of the seven-pin socket. It is connected to dispensing controller.
7-pin socket Pin NO.
Pin’s nam
e Instruction of pins Remark
1
2
3
4
5
6
7
1 24V
DC Power supply“+”
2 0V Pow
er supply“-”
3 Mout1
Main signal output1, the
current is less than 0.5A
It’s used to feeding signal.
4 Mout
4
Main signal output4, the
current is less than 0.5A
It
’s used to cylinder movement
signal.
5 Ein12 Exter
nal input 12 signal
It’s used to reset (ORG) signal,
alarm when solder wire is
blocking or lacking etc.
6 Mout
2
Main signal output2, the
current is less than 0.5A
It
’s used to output working state
signal.
7 Mout
5
Main signal output5, the
current is less than 0.5A
I
t’s only effective as pulse signal
inputted.
N
OTE: * If the customers need special function, the input and output signal can be set again.
3
.3 Instruction about DB37 socket
NOT
E: DB37 socket is an optional fitting. It must be ordered if you need it to do information input or output.
3.3.1 Pins Instruction of DB37
(s
ocket of DB37)