00196800-03_IM_Explorer_2.10_EN.pdf - 第12页
1 I nt rod uc ti on In st al la tio n a n d Co nf ig ura t ion G ui de SIP LACE Ex pl ore r 1. 3 A dd iti on al Re ma rk s Ed iti on 02 /2 01 2 EN 12
Installation and Configuration Guide SIPLACE Explorer 1 Introduction
Edition 02/2012 EN 1.3 Additional Remarks
11
– If partially placed boards are removed from the SIPLACE machine, without specifying this ter-
mination in the station software and removing them via the output conveyor, these boards will
not be recorded by the OIS and SIPLACE Explorer systems. In this case, the station software
is not able to generate the data set needed to record the boards. This restriction applies to all
available versions of the station software. If you need to terminate board placement, always
proceed as follows:
– Terminate the board at the station software interface.
– Remove the board from the output conveyor of the station and not by opening the hood and
taking it directly out of the placement area.
– The following restrictions apply to the SMA pages listed below, if no boards are placed at the
last station in the production line:
– Machine Navigator:
OLE value will not be shown (N/A).
– Overview of OLE / OEE:
Overall Line Efficiency diagram: Values for OLE, performance and availability will not be
shown correctly.
Overall Equipment Efficiency by Station diagram: station data is not shown correctly for
stations which do not place boards.
– OEE Analysis:
Table: values for performance and availability will not be shown correctly for lines and sta-
tions which do not place boards.
Overall Equipment Efficiency diagram – comparison diagram: Values for OLE, perfor-
mance and availability will not be shown correctly for the line.
– When using MS Windows 2003 Server, the web server (Tomcat) must be configured accord-
ingly. For further details about the configuration process, refer to “Using Windows 2003 Server”
on page 42.
– The name of the computer on which Tomcat is installed may not include special characters, in
particular no underscore (_). If the name does include these characters, it will not be possible
to display the website. For further details about this restriction, see "http://support.mi-
crosoft.com/kb/275033".
1 Introduction Installation and Configuration Guide SIPLACE Explorer
1.3 Additional Remarks Edition 02/2012 EN
12
Installation and Configuration Guide SIPLACE Explorer 2 System Components and Configurations
Edition 02/2012 EN 2.1 Overview of System Components
13
2 System Components and
Configurations
2.1 Overview of System Components
SIPLACE Explorer can either be installed in SIPLACE LAN or distributed via SIPLACE and client
LANs. Users not wishing to install the complete SIPLACE Explorer program on one computer can
distribute the individual components among several computers. 2
The SIPLACE Explorer architecture is displayed in the following diagram: 2