00196800-03_IM_Explorer_2.10_EN.pdf - 第91页
Ins tall ati on and Con figu rati on Guid e SIPL AC E Exp lor er 4 Co nfigur atio n Edi tion 02 /201 2 EN 4.3 D ata base Se t ti ngs 91 – Step 3- Configure Database Step 3 ta kes your modifications from S tep 2 and use…
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.3 Database Settings Edition 02/2012 EN
90
– Step 2 - Perform Configuration Test
At Step 2 you can change your settings. This is also where you define the name of the SE
system database for the line and where you specify the user (and corresponding password)
who is to have access to this database.
4
Fig. 4 - 59 Step 2- database connection wizard
Once you have made and checked all entries, click on Next to continue.
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2012 EN 4.3 Database Settings
91
– Step 3- Configure Database
Step 3 takes your modifications from Step 2 and uses them to configure the database
connection.
4
Fig. 4 - 60 Step 3 database connection wizard
Click on Finish and the wizard will carry out the required configuration. The DB settings are
now correctly specified for your project. and the database and set user will be created.
You will receive a success message.
4
Fig. 4 - 61 Step 3 database connection wizard
Click OK. You can now configure your system database.
4
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.3 Database Settings Edition 02/2012 EN
92