00197222-02_IM_PCB_Barcode_V2_0_SP2_de_en.pdf - 第15页

PCB Barcode V2.0 SP2 / Installation Manual Ausgabe 03/2012 Edition The dongle is not deteted If the dongle is not detected, the path to the license file is possi bly not set. ► Switch to the operating system level. ► Öpe…

PCB Barcode V2.0 SP2 / Installation Manual Ausgabe 03/2012 Edition

4.4 Troubleshooting

The licenses are not automatically copied to the D:\Halcon\license directory

► Copy the suitable license file manually from the USB stick directory into the above mentioned

directory. The file has to correspond to the dongle ID on the green USB dongle. As of the 706.0

station software version, the dongle ID may be read out as described in section 4.3.

Figure 4-5: License file

The indicator on the USB dongle does not light up in red

► Check the USB cable and the USB ports.

The aksusb.sys file is missing

The first time the dongle is used it might happen that a Windows dialog appears under Windows

XP Embedded, displaying a message that the aksusb.sys file is missing. In this case:

► Click on the Browse button and select the C:\Windows\System32\Setup\Aladdin\hasphl path.

PCB Barcode V2.0 SP2 / Installation Manual Ausgabe 03/2012 Edition

The dongle is not deteted

If the dongle is not detected, the path to the license file is possibly not set.

► Switch to the operating system level.

► Öpen the Control Panel under Start - Settings.

► Click on System, to open the system properties.

Figure 4-6: Control Panel - System

PCB Barcode V2.0 SP2 / Installation Manual Ausgabe 03/2012 Edition

► Open the Environment Variables in the Advanced tab.

Figure 4-7: Opening Environment Variables

The HALCONROOT variable with the D:\Halcon path should be listed in the lower window under

System variables.

Figure 4-8: System variables

► If not, repeat the installation.