YS12P_YS12F_Mainte_E.pdf - 第123页
5-4 5 Lubrication points and schedule 2.4 W-axis (Conveyor) W-axis lubrication points W-axis ball screw W-axis ball screw W-axis guide Grease nipple W-axis guide Grease nipple W-axis hexagon spline Grease gun: Manual lub…
5-3
5
Lubrication points and schedule
2.2 Y-axis
Y-axis lubrication points
Grease nipple for Y-axis
ball screw
Grease nipples (2 places
each on front and rear)
for Y-axis guide
Grease nipple for Y-axis
ball screw
Grease nipples for
Y-axis guide
Grease gun:
Manual lubrication:
53502-M7-00
Lubrication section Lubrication point Interval Procedure
Guide 4
Once every
2 months
Grease gun: Standard nozzle (ø10 mm)
Ball screw 2
2.3 PU-axis
PU-axis lubrication points
Ball screw Ball screwBall guide Ball guide
Grease gun:
Manual lubrication:
53503-M7-!0
Lubrication section Lubrication point Interval Procedure
Ball guide 2
Once every
2 months
Manual lubrication
Ball screw 2
5-4
5
Lubrication points and schedule
2.4 W-axis (Conveyor)
W-axis lubrication points
W-axis ball screw
W-axis ball screw
W-axis guide
Grease nipple
W-axis guide
Grease nipple
W-axis hexagon spline
Grease gun:
Manual lubrication:
53504-M7-10
Lubrication section Lubrication point Interval Procedure
Guide 2
Once every
6 months
Grease gun: Standard nozzle (ø10 mm)
Ball screw 2 Manual lubrication
Hexagon spline 1 Manual lubrication
5-5
5
Lubrication points and schedule
2.5 Z-axis (Spline shaft)
n
NOTE
Basically, the lubricating the spline shaft (Z-axis) is not required. However, the grease on the spline shaft surface is
removed by touching with hand or by sprinkling solvent. As a result, the spline shaft gets easily rusted. Apply the
specified grease (NSL) slightly for anti-rusting as needed.
Z-axis lubrication points
Grease gun:
Manual lubrication:
Z-axis spline shaft
53505-M7-00
Lubrication section Lubrication point Interval Procedure
Z-axis spline shaft 5 As needed Apply a thin coat of grease by hand.