YS12P_YS12F_Mainte_E.pdf - 第32页
xxix Safety instructions n Label positions W arning/caution labels YS12P Rear side ■ Open/close cover inner side ■ Conveyor opening ■ Lower panels ■ Side ■ Panel inner side ■ Open/close cover 93202-L6-20 W arning/caution…
xxviii
Safety instructions
3.4 Label positions
The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
For safety precautions other than those on the labels shown in this section, see the instructions in "1. Safety".
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
n
NOTE
When connecting power to this equipment, refer to "Power connection terminals" described in the appendix of the
maintenance manual or user's manual.
Warning/caution labels
YS12P Front side
■ Open/close cover inner side
■ Lower panels
■ Open/close cover, Conveyor opening
■ Cutter inner side
■ Panel inner side
■ Feeder setup section
■ Side
■ Cutter section
■ Main switch
93201-L6-20
xxix
Safety instructions
n
Label positions
Warning/caution labels
YS12P Rear side
■ Open/close cover inner side
■ Conveyor opening
■ Lower panels
■ Side
■ Panel inner side
■ Open/close cover
93202-L6-20
Warning/caution labels
Head assembly
■ Z-axis linear scale section
■ SC-axis linear scale section
■ Camera unit
■ Camera unit
93204-L6-20
xxx
Safety instructions
n
Label positions
Warning/caution labels
YS12F Front side
■ Open/close cover inner side
■ Cutter section
■ Open/close cover, Conveyor opening
■ Lower panels
■ Side
■ Main switch
■ Feeder setup section
■ Cutter section
■ Panel inner side
■ Cutter inner side
93201-L7-20