TM2939.Solder Remaining Quantity Detection-Function.pdf - 第4页
SMT Software Engineering Group IM Operati ons Y AMAHA MOTOR CO., L TD. MDOC-SOFT50 128 4/ 18 3.2. Board data W hen this func tion is eff ective, the [ Print] - [ Solder Detec t] tab is enab led. Fig.3.3 [Pr int] - [S old…
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
3/18
Fig.2.2 Summary of the “Solder Remaining Quantity Detection” function
3. Settings
Settings to use this function are as follows.
3.1. Machine settings
In [Machine] - [Setting] - [Machine Information] - [Installation settings], set ”Solder Scan
Sensor Position” to ”Rear Only” and ”Solder Remaining Quantity Detection” to ”Use”.
When the machine equips with “PSC (Print Stability Control)”, set ”PSC (Print Stability
Control)” to ”Syringe Type” or ”Pot Type”, not invalid this. (This setting makes Safety Checks of
FX-axis activated.)
After you change the setting, save it and reboot the machine.
Fig.3.1 “Installation Settings”
Solder on the mask
Rolling width
Detect Solder Width
(Metal mask only.
Plastic mask or mesh
mask unusable)
Solder Scan Sensor
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
4/18
3.2. Board data
When this function is effective, the [Print] - [Solder Detect] tab is enabled.
Fig.3.3 [Print] - [Solder Detect] screen
Table3.1 Setting items of board data
Item Initial value
Input range
Explanation
Solder Remaining
Quantity Detection
Not Use Not Use
/ Use
Set whether “Solder Remaining Quantity
Detection” function is used or not.
Warning Rolling
Width (mm)
14.000
0.000
~99.999
Set the rolling width that ”Ea8986:Solder
Empty Warning” message is displayed.
Actually, this message is displayed when
the rolling width falls below this value
consecutively in “Consecutive Detection
Count”(see below).
Auto-running is continued while displaying
warning.
Error Rolling Width
(mm)
12.000
0.000
~99.999
Set the rolling width that ”Ea8987:Solder
Empty Error” message is displayed.
Actually, this message is displayed when
the rolling width falls below this value
consecutively in “Consecutive Detection
Count”(see below).
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50128
5/18
Auto-running is stopped when displayed
error.
If “Error Rolling Width” is larger than
“Warning Rolling width”, “Ea8980:Data
Check Error” is displayed when data is
checked.
Consecutive
Detection Count
(Number of times)
3
1~9999 Set necessary number of consecutive
scanning times until “Ea8986:Solder
Empty Warning” or “Ea8987:Solder Empty
Error“ is displayed.
Rolling shape is sometimes unstable. If
warning or error is judged by only one
rolling width scan result, warning or error
might be caused by mistake.
To avoid this, “Ea8986:Solder Empty
Warning” and “Ea8987:Solder Empty
Error” can be displayed only when the
rolling width falls below “Warning Rolling
Width” or “Error Rolling Width”
consecutively in “Consecutive Detection
Count” times.
Refilling Solder
Board Count
(Number of boards)
3
0~9999 Set the production board amount that
neglects the rolling width scan result just
after solder supply.
The rolling width might be scanned
incorrectly just after solder supply because
solder is not uniform until some boards are
printed.
To avoid this, warning or error is able to be
not counted even if scan result fall below
“Warning Rolling Width” or “Error Rolling
Width” from solder supply until the
production of board amount set by
“Refilling Solder Board Count” completed.
Besides, production board count is started
when “Yes” button is tapped in
“Ea8988:Supply Solder” message.