00194398-01.pdf - 第46页
Retrofit instructions SIPLACE HS-60 2.5 Mechanical conversion 12/2004 Edition 46 : Loosen the six screws on the cove r over the conveyor c ontrol conv ersion board , and push the cover away . 2 2 : Remove the cover over …
Retrofit instructions SIPLACE HS-60
12/2004 Edition 2.5 Mechanical conversion
45
: Disconnect the main compressed air supply to the lifting tables in placement area 1.
2
: Insert the T-piece provided and the four-way or two-way distributor between the compressed
air line and main supply to the lifting tables, as shown in the picture.
2
2
2
Main compressed air supply to lifting tables
Retrofit instructions SIPLACE HS-60
2.5 Mechanical conversion 12/2004 Edition
46
: Loosen the six screws on the cover over the conveyor control conversion board, and push the
cover away.
2
2
: Remove the cover over the conversion board (6 screws).
. 2
2
2
Screws
in cover
of conveyor
control
Retrofit instructions SIPLACE HS-60
12/2004 Edition 2.5 Mechanical conversion
47
: Pull one compressed air hose (PUN 4x0.5) per lifting table in placement area 2 to the input side
(processing area 1) and connect it to the four-way or two-way distributor.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1 hose per conveyor track to ceramic
substrate centering units on the input side
1 hose per conveyor track to ceramic
substrate centering units on the output side
Four-way or two-
way distributor