Installation_Manual_SIPLACE_Explorer_2.4_EN.pdf - 第39页

Installation and Configuration Guide SIPLAC E Explorer 3 Installing SIPLACE Explorer Edition 08/2008 EN 3.2 Update Installation of SIPLACE Explorer 2.4 39 → In this case, you can either enter the path to the J2 SE Runtim…

3 Installing SIPLACE Explorer Installation and Configuration Guide SIPLACE Explorer

3.2 Update Installation of SIPLACE Explorer 2.4 Edition 08/2008 EN

Fig. 3 - 18 SIPLACE Explorer welcome

→ Exit all other programs and then click on Next.

→ Before you can run SIPLACE Explorer, J2SE Runtime Environment 6.0 update 1 or higher

must be installed on your PC. If it is already installed on your PC, installation will begin

automatically.

→ However, if the installation procedure is unable to find J2SE 6.0. update 1, the Locate J2SDK

dialog box will appear on your screen.

Fig. 3 - 19 SIPLACE Explorer setup - locate JAVA 2 SDK

Installation and Configuration Guide SIPLACE Explorer 3 Installing SIPLACE Explorer

Edition 08/2008 EN 3.2 Update Installation of SIPLACE Explorer 2.4

→ In this case, you can either enter the path to the J2SE Runtime Environment 6.0 update 1 folder

directly into the text field or click on the Browse button and use the Open File dialog box to

find the J2SE Runtime Environment 6.0 update 1 folder.

→ If you failed to correctly specify the path to the folder in which J2SE Runtime Environment 6.0

update 1 is installed, you will see the following message.

Fig. 3 - 20 SIPLACE Explorer setup - unable to locate J2SE

→ Click OK to return to the previous screen. SIPLACE Explorer requires J2SE Runtime

Environment 6.0 update 1 to be installed prior to installation of SIPLACE Explorer.

→ At this point, you can either try to specify the J2SE Runtime Environment 6.0 update 1 folder

again, or click Cancel to exit the installation of SIPLACE Explorer.

→ If you have selected Cancel, install the version of J2SE Runtime Environment 6.0 update 1

included on the Support Media DVD and then restart the installation of SIPLACE Explorer.

NOTE

If you have the J2 Runtime environment (not J2SE Runtime Environment 6.0 update 1) -

available from Sun Microsystems at http://java.sun.com/j2se - installed on your system, the

website generated by the SIPLACE Explorer Website Builder will not function properly as it

is based on JSP, which requires J2SE Runtime Environment 6.0 update 1. 3

→ The installation of SIPLACE Explorer 2.4 will be continued once J2SE Runtime Environment

6.0 update 1 has been localized. The Setup Status dialog box will open.

→ The actual installation of SIPLACE Explorer V2.4 will begin.

3 Installing SIPLACE Explorer Installation and Configuration Guide SIPLACE Explorer

3.2 Update Installation of SIPLACE Explorer 2.4 Edition 08/2008 EN

Fig. 3 - 21 SIPLACE Explorer setup - setup status

→ Once the installation procedure has finished, the following dialog box will open.

Fig. 3 - 22 SIPLACE Explorer Setup - Installation complete

→ Click on Finish. After you have rebooted your computer, the update version of SIPLACE

Explorer 2.4 will be available for use. Follow the instructions at “Starting SIPLACE Explorer” on

page 41.