Installation_Manual_SIPLACE_Explorer_2.4_EN.pdf - 第81页
Installation and Configuration Guide SIPLACE Explorer 4 Configuration Edition 08/2008 EN 4.2 Configuring the Factory C onfiguration Utility 81 4 Fig. 4 - 30 Convert database → Specify the access data for th e database ad…
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.2 Configuring the Factory Configuration Utility Edition 08/2008 EN
80
→ If the connection does not function properly, you will see the following information box:
4
Fig. 4 - 28 DB error
→ Click on the Setup DB Connection button to start the DB Connection Wizard setup
sequence and configure the SIPLACE Explorer factory database. Follow the instructions at
“Database Connection Wizard” on page 98.
→ If the connection functions properly, you will see the following information box:
4
Fig. 4 - 29 Success
→ Click OK. The system will check the database data. If the database has data from SIPLACE
Explorer V2.3, V2.2, V2.1, or V2.0, you will need to convert the database for SIPLACE V2.4,
due to the changed data structure in the SIPLACE Explorer V2.4 database. In this case, the
Convert Database dialog box will open.
NOTE
Consider the following when converting the database
- You require database administrator privileges.
- Once you have started the conversion, this process can not be stopped.
- The conversion time depends on the size of the database and on the performance of the
computer. It may take up to one hour. 4
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 08/2008 EN 4.2 Configuring the Factory Configuration Utility
81
4
Fig. 4 - 30 Convert database
→ Specify the access data for the database administrator and enable the Backup database
option.
→ Confirm your entries with OK. The DB backup location dialog box will open
4
Fig. 4 - 31 DB backup location
→ Before performing the conversion, the system creates a backup file of the database. Specify
the folder for this file in the Folder for database backup field. Click on the Browse ...
button to select an existing folder.
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.2 Configuring the Factory Configuration Utility Edition 08/2008 EN
82
→ Confirm your choice with OK. The database will be converted. This may take up to one
hour. The conversion time depends on the size of the database.
4
Fig. 4 - 32 DB backup
→ After successful conversion of the database, the following information window will open:
4
Fig. 4 - 33 Success
→ Dependent of the database size, you can compress the database, the following information
window will open:
4
Fig. 4 - 34 Database compression
NOTE
We recommend activating this DB compression step, when the user has restored the
SIPLACE Explorer factory database or has moved the raw database files to another disk or
to another computer.
With the DB compression it is possible to avoid extended access times of the websites. 4
→ Click Yes, to compress the database at next DB maintenance.
→ Click OK. The Factory Configuration Utility dialog box will open.