00194585-05_Installation_Manual_EDM_EN.pdf - 第34页

Installation Manual, SIPLACE EDM Version 1.1 SP2 Issue 12/2006 Master server Valid for: Description: Endpoint at which the master server lis tens in for incoming change notifications. Determines the value for “outgoing c…

100%1 / 65
Installation Manual SIPLACE EDM Version 1.1 SP2 Issue 12/2006
used in both a domain/active directory-based network environment as well as in a
pure workgroup installation.
5.2.3.9 Outgoing requests
Key: masterRequests
Endpoint Type:
Valid for: Line server
Clearing pool
Target address for service requests sent by a line server to the master server. The
setting must be identical to the “Incoming Requests” setting on the master server.
Description:
5.2.3.10 Outgoing change notifications
Key: masterNotifications
Endpoint Type:
Line server Valid for:
Target address for change notifications sent by a line server to the master server.
The setting must be identical to the “incoming change notifications” setting on the
master server.
Description:
5.2.3.11 Incoming requests
Key: incomingRequests
Endpoint Type:
Master server Valid for:
Description: Endpoint at which the master server listens in for incoming service requests.
Determines the value for “outgoing requests” on the line servers.
The value must be different from the value for “incoming change notifications”.
5.2.3.12 Incoming change notifications
Key: incomingNotifications
Endpoint Type:
33 of 65
Installation Manual, SIPLACE EDM Version 1.1 SP2 Issue 12/2006
Master server Valid for:
Description: Endpoint at which the master server listens in for incoming change notifications.
Determines the value for “outgoing change notifications” on the line servers.
The value must be different from the value for “incoming requests”.
5.2.3.13 Incoming clearing pool requests
Key: incomingClearingPoolRequests
Endpoint Type:
Valid for: Master server
Clearing pool
Endpoint at which the clearing pool listens for incoming commands from the master
service.
Description:
5.2.3.14 EDM tool endpoint
Key: edmToolEndPoint
Endpoint Type:
EDM_SPI_REMOTE_HOST:9002/EdmTool
Default:
Valid for: Master server
Line server
EDM Tool
Description: Endpoint for entering change notifications. The default value means that the
comment dialog boxes always open on the computer at which the SPI event
was triggered that caused the notification which requires a comment (if an EDM
tool is installed there).
If the line engineer is to enter the comments at a different computer, replace
EDM_SPI_REMOTE_HOST in the configuration file of the line server with the
host name of this computer.
5.2.3.15 Endpoint configuration
Key: endpointConfig
Section Type:
34 of 65
Installation Manual SIPLACE EDM Version 1.1 SP2 Issue 12/2006
Master server Valid for:
Description: This section contains pairs of values of the form:
<add key="[hostname]" value="[Endpoint]"/>
There is one pair of such values for each line server. This list describes the
connections from the master server to the line servers to be used.
The network ID (not the alias) of the computer concerned must be entered under
hostname. You can also enter “*” or “all” as the value for hostname. This is then
used as the default value when no entry can be found for a specific line server.
Important: All line servers should always be listed in every configuration file. In
particular, the name of the local computer must be included (or at least an entry for
’*’).
5.2.3.16 Communication timeout
Key: communicationTimeout
Time Type:
P0Y0M0DT0H1M0S (= 1 minute)
Default:
Valid for: Line server
Master server
Clearing pool
Description: Time period in which a message must be received from a particular communication
partner. The setting should generally not be changed. The other options are as
follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.17 Use advanced EDM notification filtering
Key: useAdvancedNotificationFiltering
String (“true”/”false”) Type:
true Default:
35 of 65