00194585-05_Installation_Manual_EDM_EN.pdf - 第36页
Installation Manual, SIPLACE EDM Version 1.1 SP2 Issue 12/2006 Master server Valid for: Description: Activation/deactivation of direct import/rej ection of notifications by the master server. If these filters are deactiv…
Installation Manual SIPLACE EDM Version 1.1 SP2 Issue 12/2006
Master server Valid for:
Description: This section contains pairs of values of the form:
<add key="[hostname]" value="[Endpoint]"/>
There is one pair of such values for each line server. This list describes the
connections from the master server to the line servers to be used.
The network ID (not the alias) of the computer concerned must be entered under
hostname. You can also enter “*” or “all” as the value for hostname. This is then
used as the default value when no entry can be found for a specific line server.
Important: All line servers should always be listed in every configuration file. In
particular, the name of the local computer must be included (or at least an entry for
’*’).
5.2.3.16 Communication timeout
Key: communicationTimeout
Time Type:
P0Y0M0DT0H1M0S (= 1 minute)
Default:
Valid for: Line server
Master server
Clearing pool
Description: Time period in which a message must be received from a particular communication
partner. The setting should generally not be changed. The other options are as
follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.17 Use advanced EDM notification filtering
Key: useAdvancedNotificationFiltering
String (“true”/”false”) Type:
true Default:
35 of 65
Installation Manual, SIPLACE EDM Version 1.1 SP2 Issue 12/2006
Master server Valid for:
Description: Activation/deactivation of direct import/rejection of notifications by the master
server.
If these filters are deactivated, all notifications are entered in the clearing pool. If
they are activated, changes to objects can be accepted/rejected without first being
displayed in the clearing pool (for configuration, see sections 5.4.3 and 5.4.4).
5.2.3.18 Modified object protection
Key: useModifiedObjectProtection
String (“true”/”false”) Type:
true Default:
Line server Valid for:
Description: Activation/deactivation of the overwriting of modified objects in the line server.
If this object is activated, objects which are currently in the clearing pool are not
overwritten with the (older) data from the master server during a pull operation.
5.2.3.19 Response timeout
Key: responseTimeout
Time Type:
P0Y0M0DT0H5M0S (= 5 minutes)
Default:
Line server Valid for:
Description: Time period in which the line server considers a reply to a service request from the
master server to be valid. Timing problems can arise here due to the interaction
between SIPLACE Pro and XML Import/Export that may require a change to be
made. However, the timeout should not be set to a value too high since this can
cause the users to become very irritated.
The other options are as follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
36 of 65
Installation Manual SIPLACE EDM Version 1.1 SP2 Issue 12/2006
5.2.3.20 Compression type
Key: compressionType
Enum Type:
Values: None
Zip
Bzip
Zip Default:
Valid for: Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical throughout
the entire system.
The default setting represents a good compromise between the compression ratio
and processing time. If extremely large amounts of data are transferred by the
customer, it may be necessary to set the compression to Bzip. This method offers a
much higher compression ratio than Zip, but at the cost of longer processing times.
Compression should only be switched off when the amount of data is always very
small (< 4MB).
5.2.3.21 Client workflow configuration
Key: clientWorkflowConfig
File Type:
Clientworkflowconfig.xml Default:
Line server Valid for:
Definition of the workflow on the EDM client. The file name is specified relative to
the configuration directory.
Description:
5.2.3.22 Service remoting endpoint
Key: serviceRemotingEndpoint
String Type:
37 of 65