TP2492.Parts Set Pos Quantity Arrangement.pdf - 第5页

  SMT Software Engineering Group IM Operati ons YAMAHA MOTOR CO., LTD. MDO C-SOFT502 34  5/18  4.2 Det ail Settings 4.2.1 Optimize r Setting Select “DO” or “NOT” in [ S et optimization para meters] – [Basic…

100%1 / 18
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 4/18
4 Detail
4.1 Function in optimization
4.1.1 Set parts to plural set position in the lane
AsshownintheFig.1,whentheheadhasrestrictionareafortheboard,partshavetobeset
pluralsetpositionsmanually.Thisfunctiondoesthisautomaticallybythefollowingsettingsand
makesitpossibletomakeboarddatawhichisreadytostartproduction.
Fig. 1 Example : necessary case of plural set pos
4.1.2 Function of Lane Divide
This function succeeds the function of “Lane Divide Prohibited Parts Setting” (*2) in the
FeederViewer.Thesettingrecordsarealsosucceededautomaticallyinupgradingtheversion.
(*2)Thefunctionof“LaneDivide”istosetpartsfeedersetpositionsinbothlanesinorderto
make“ParallelMount”possible.
Set plural set pos
The area head can reachMount Position of “PART A”
Set plural set pos
The area head can reachMount Position of “PART A”
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 5/18
4.2 Detail Settings
4.2.1 Optimizer Setting
Select “DO” or “NOT” in [Set optimization parameters] – [Basic Condition] – [Exec Option]
– [Parts set pos quantity arrangement] – [Each Lane] / [Dual Lane]. (See Fig.2.) This is
applied for each optimizer setting.
Fig. 2. “Set optimization settings”
[Dual Lane] (*3)
“Prohibit” : “Lane Divide” is NOT executed
“Allow” : Allow “Lane Divide” executed
(*3) This setting appears when dual lane machine exists in the line data.
[Each Lane]
“Prohibit” : Prohibit to set parts to plural set positions in one side lane
“As required” : Allow to set parts to plural set positions in one side lane
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50234 6/18
[Enable Each Parts Setting] (*4)
“Checked” : Apply the following setting of “parts set pos quantity by same
parts”
“Not Checked” : Not apply the setting of “parts set pos quantity by same parts”
(*4) This is available in the Optimizer of P-Tool.
[Each Parts Setting]
Open the “Setting of parts set pos quantity by same parts”. See capture 4.2.2 for
more detail.
~ Variation of “Exec Option” ~
The contents on the “Exec Option” tab differ by the machine type which is registered to the
line data. When Dual Lane machine is not in the line data, the setting of [Dual Lane] is not
shown.
Fig. 3. Difference of “Part set pos quantity arrangement” contents
(Left) Dual Lane Machine (Right) Single Lane Machine