00192402-01.pdf - 第245页
GEM for SIPLACE V7.01 ©Siemens AG, all rights r eserved page 245 of 251 PCB in the center conveyor 2010015 MachineReStarted SIPLACE station is re-booting 1 2010016 Pick upError An Pick up-Error has occ ured and <SEGME…
GEM for SIPLACE V7.01
Page 244 of 251 ©Siemens AG, all rights reserved
CEID Name Description
1711014 FM_WAG_F_TRANSPORT_NOK Transport in feeder disturbed* 1
1711015 FM_WAG_F_GURTENDE Caution: Belt end* 1
1711016 FM_WAG_KEIN_BE_ENTSORG No component disposal belt
available
1
1711026 FM_WAG_RIO Communication with table
interrupted
1
* Depending on the collection event, some of the status variables <ERRORTYPE>,
<GANTRYONERROR>, <SEGMENTONERROR>, <TRACKONERROR>,
<ERRORINFO1> and <ERRORINFO2> will be updated at each of these trolley
collection events.
0LVFHOODQHRXV
CEID Name Description
2010001 CoverOpen The protective covers was opened 1
2010002 CoverClosed The protective covers was closed 1
2010003 PCBready Placement is finished for the PCB in the
center conveyor. The PCB will now be
transported to the output conveyor.
<GANTRYINFOREV1> and
<GANTRYINFOREV2> or
<GANTRYINFOIC> will be updated.
2,
3,
34,
35,
36
2010004 TrackFull Track reset to full and
<COMPONENTNAME>,
<MASCHINESIDE>, <TRACKNUMBER>,
<DIVISION>, <LEVEL>, <GANTRYID>,
<GANTRYGROUPID> and <HEADID>
will be updated
46
2010005 TrackEmpty Track set to empty and
<COMPONENTNAME>,
<MASCHINESIDE>, <TRACKNUMBER>,
<DIVISION>, <LEVEL>, <GANTRYID>,
<GANTRYGROUPID> and <HEADID>
will be updated
46
2010006 RefRunGantry1 Reference run complete for the gantry 1
axis
1
2010007 RefRunGantry2 Reference run complete for the gantry 2
axis
1
2010008 TableDownload Software downloaded to the table and
<SOFTWAREREVTABLE> will be
updated.
23
2010009 SingleCircuitOmit The machine signals that it found a single
circuit to omit (Ink Punkt)
1
2010010 TapeCutLeft Tape cut on left side of machine 1
2010011 TapeCutRight Tape cut on right side of machine 1
2010013 PCBstartProcessing Start of the placement process for the 1
GEM for SIPLACE V7.01
©Siemens AG, all rights reserved page 245 of 251
PCB in the center conveyor
2010015 MachineReStarted SIPLACE station is re-booting 1
2010016 PickupError An Pickup-Error has occured and
<SEGMENT>, <COMPONENTNAME>,
<MASCHINESIDE>, <TRACKNUMBER>,
<DIVISION>, <LEVEL>, <GANTRYID>,
<GANTRYGROUPID> and <HEADID>
will be updated.
This event is triggered on every
movement of the z-axis in the pickup-
position without having picked up a
component.
28
2010017 PlaceError An Place-Error has occured and
<SEGMENT>,
<REFERENCEDESIGNATOR>,
<COMPONENTNAME>, <GANTRYID>,
<GANTRYGROUPID>, <HEADID>,
<PACKAGEFORMNUMBER> and
<PLACEERRORDESCRIPTION> will be
updated
29
)OX[
CEID Name Description
2111001 FM_FLUX_SYSFEHL Flux module: System error in SW
module*
1
2111002 FM_FLUX_WRITE_FLUXMA Flux module: Error writing FLUX.MA file* 1
2111003 FM_FLUX_READ_FLUXMA Flux module: Error reading FLUX.MA file* 1
2111004 FM_FLUX_NOT_INIT Flux pump not initialized* 1
2111005 FM_FLUX_INITIALISIEREN Error upon initialization of flux pump* 1
2111006 FM_FLUX_VALVE Faulty flux valve* 1
2111007 FM_FLUX_PLUNGER Faulty flux syringe* 1
2111008 FM_FLUX_TIMEOUT Timeout of flux pump* 1
2111009 FM_FLUX_COMMAND Incorrect command to flux pump* 1
2111010 FM_FLUX_CHECKSUMME Checksum error upon activation of flux
pump*
1
2111011 FM_FLUX_Z_OBEN Z-axis of flux nozzle not in raised
position*
1
2111012 FM_FLUX_Z_KLEMMT Z-axis of flux nozzle jammed* 1
2111013 FM_FLUX_LEER Flux tank empty* 1
2111014 FM_FLUX_NACHFUELLEN Warning: Replenish flux tank* 1
* Depending on the collection event, some of the status variables <ERRORTYPE>,
<GANTRYONERROR>, <SEGMENTONERROR>, <TRACKONERROR>,
<ERRORINFO1> and <ERRORINFO2> will be updated at each of these flux
collection events.
GEM for SIPLACE V7.01
Page 246 of 251 ©Siemens AG, all rights reserved
2WKHU(UURU(YHQWV
CEID Name Description
2211001 FM_ABH_KEIN_BE Component not at nozzle after pick-up 1
2211002 FM_BEST_KEIN_BE Component not at nozzle before
placement
1
2211003 FM_ABH_SPURLEER Track empty, no component during pick-
up
1
2211004 FM_FM_SPURLEER Flatpack magazine is empty 1
2211006 FM_VAK_DELTA_GRENZE
_SP
RV: intervals open - closed vacuum
values too low
1
2211032 FM_BA_NOTAUS PCB interrupted due to EMERGENCY
STOP
1
2211033 FM_SP_COM_ERR Communication with SIPLACE Pro
interrupted
1
2211034 FM_SP_CONFIG Connection between station and
SIPLACE Pro incorrectly configured
1
2211035 FM_SIPLPRO_GF_STORE
_NOK
Saving of the fiducial in the SIPLACE
PRO line control is not possible
1
2211036 FM_SIPLPRO_MK_STORE
_NOK
Saving of the fiducial in the SIPLACE
PRO line control is not possible
1
2211037 FM_SP_2SERVER More than one connection from the
station to SIPLACE Pro
1
2211038 FM_NUTZEN_OHNE_MAR
KE
Cluster contains fiducials which must still
taught
1
2211039 FM_BA_SCHUETZ_K5 software relay for op.voltage defective 1
2211040 FM_BA_DRUCKLUFT Temporary drop in pressure 1
2211041 FM_TRANSP_MA Error in TRANSP.MA file or not available 1
2211042 FM_FK_TRACK_RUN_LO
W_MIN
LM warning: Buffer time of component
expires in a few minutes
1
2211043 FM_FK_TRACK_RUN_LO
W_PERCENT
LM warning: Component supply less than
percentage minimum
1
2211044 FM_FK_TRACK_RUN_LO
W_VALUE
LM warning: Component supply less than
percentage minimum
1
2211045 FM_SPUR_LEER_FK Track set empty by LM 1