00194482-02_AI_NozzleChanger_X_605_DE+EN.pdf - 第41页

Assembly instructions Nozzle changer SIPLACE X-Series / D3 11/2011 Edition 41 2 2 : Use the assembly bracket and two screws to fit the HUB and then att ach the connecting cabl e (see photographs below) . : Remove the bla…

100%1 / 70
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
40
2
: Fix the cable using cable clips.
2
For single gantry placement areas, the cable must be fixed at locations 2 and 4 so that it cannot
be damaged by the component trolley docking unit. 2
2
2
2
: Screw the one-wire hub to the assembly bracket (2x mushroom-head self-tapping screw, Torx
D2.5x6, item no.: 03009465-xx).
Fix the connecting cables using cable ties.
Opening in the machine frame
Cable clips
Connector to the HUB
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
41
2
2
: Use the assembly bracket and two screws to fit the HUB and then attach the connecting cable
(see photographs below).
: Remove the blanking plug from the compressed air hose and fit the reducer
(reducer for nozzle changer C&P20 consisting of:
03021003-xx Hose connector RTU-PK-3/4
03032029-xx Hose HT PUN-6 L=40 mm).
2 screws on the underside
Cable ties
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
42
2
2
Connecting cable
2 screws
(DIN 6912-M4 x 8-8.8, item no.: 00095106-xx)