00194482-02_AI_NozzleChanger_X_605_DE+EN.pdf - 第55页
Assembly instructions Nozzle changer SIPLACE X-Series / D3 11/2011 Edition 55 : Fit the nozzle changer with the four screws (DIN912-M4 x 10-A2, item no.: 00313069-xx). 2 2 : Attach the compressed air hose to the compress…
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
54
: Fit the nozzle take-off device
(screws: DIN 7991-M4 x 20-8.8 (item no.: 00333782-xx).
: If there is one, fit the reject bin sensor from the component reject park position on the nozzle
ejector mount (see the retrofit instructions for the reject bin sensor SIPLACE X series (item no.:
00194550-xx).
: Insert the reject bin.
2
: Plug the cable and the compressed air hose into the C&P head nozzle changer.
The cable for row 1 is marked "a".
2
Reject bin
Reject bin, second row
Nozzle take-off device
Cable
Compressed
air connector
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
55
: Fit the nozzle changer with the four screws (DIN912-M4 x 10-A2, item no.: 00313069-xx).
2
2
: Attach the compressed air hose to the compressed air hose 2.5 bar.
2
2
: Secure all the cables with cable ties.
Compressed air hose with y piece 2.5 bar
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
56
Fitting the second row of nozzle changers 2
2
The second row of a 12-nozzle changer can be installed wrongly.
It must not be fitted in the PCB transport direction. 2
2
: Tap the dowel pins into the relevant holes in the bracket and screw the bracket on as shown.
2
2
: Plug the cables and the compressed air hose into the C&P head nozzle changer.
The cable for row 2 is marked "b".
2
2
2
2
2
Dowel pins
(DIN 6325 - 5m6 x 14-St, item no.: 00323142-xx)
Screw
(DIN 7991-M5 x 12-8.8, item no.: 00306624-xx)
Cable
Compressed
air connector