00194482-02_AI_NozzleChanger_X_605_DE+EN.pdf - 第58页
Assembly instructions Nozzle changer SIPLACE X-Series / D3 11/2011 Edition 58 : Put a Y connector on to the disconnected hose . Use the Y connector to connect the comp ressed ai r hoses (2.5 bar) of both nozzle changers.…
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
57
: Connect the second nozzle changer to the one-wire hub.
2
2
: Place the nozzle changer onto the newly fitted carrier with the top facing downwards.
: Connect the compressed air hose to the new nozzle changer.
2
2
2
2
2
2
2
2
2
2
Slot for the reject bin sensor
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
58
: Put a Y connector onto the disconnected hose.
Use the Y connector to connect the compressed air hoses (2.5 bar) of both nozzle changers.
2
2
The wiring should look like this: 2
2
2
2
2
2
2
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
59
: Attach the cable for the power supply to the nozzle.
2
2
: Screw the nozzle changer on with four M5x12 screws.
2
2
2