00194482-02_AI_NozzleChanger_X_605_DE+EN.pdf - 第51页
Assembly instructions Nozzle changer SIPLACE X-Series / D3 11/2011 Edition 51 Fitting the second row of C&P20 nozzle changer s 2 : Fit the mounts for the secon d row of nozzle ch angers and ch eck the he ight as desc…
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
50
: Attach the compressed air hose with the reducer at the magnet valve of the component trolley
docking unit (pressure: 4.5 bar).
(Reducer for nozzle changer C&P20 consisting of:
03021003-xx Hose connector RTU-PK-3/4
03032029-xx Hose HT PUN-6 L=40 mm).
2
2
: Secure all the cables and hoses using cable ties.
2
2
2
2
2
2
2
2
2
2
2
Compressed air hose
Reducer
Magnet valve
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
51
Fitting the second row of C&P20 nozzle changers 2
: Fit the mounts for the second row of nozzle changers and check the height as described in sec-
tion 1.3.1 Setting the height of the nozzle changer contact surface.
: Tap the dowel pins (DIN 6325 - 5m6 x 14-St, item no.: 00323142-xx) into the relevant holes in
the mount and screw the mount in place as shown (screws DIN 7991-M5 x 12-8.8, item no.:
00306624-xx).
2
: Tap the pins into the relevant holes in the nozzle ejector mount and screw the mount on as
shown.
2
Pins
DIN 6325 - 5m5 x 16-St, item no.: 00619866-xx
Screws
DIN912-M5 x 16-8.8, item no.: 00845044-xx
Assembly instructions Nozzle changer SIPLACE X-Series / D3
11/2011 Edition
52
: Connect the second nozzle changer to the one-wire hub.
2
2
: Connect the compressed air hose and reconnect the two nozzle changers to the compressed
air supply using a Y-piece.
2
2
Nozzle changer
connecting cable
Slot for the
reject bin sensor