YSM40 Mainte_E.pdf - 第160页

MAINTENANCE MANUAL Apr . 2015 V ersion 2.10 © Y AMAHA MOTOR CO., L TD. IM Operations All rights reserved. No part of this publication may be reproduced in any form without the permission of Y AMAHA MO TOR CO., L TD. Info…

100%1 / 160
A-4
Appendix
1.3.2 NEXT INTERFACE connector
Whenthefollowingthreeconditionsaremet,theNEXTINTERFACEcircuitinthemachineallowstheboardto
becarriedout.
1.Machineisreadyforcarryingouttheboard(BAOUT:ON)
2.Boardcarry-insignalisinputfromthedownstreammachine.(BUSYIN[N0100420]:ON)
3.Automaticoperationsignalisinputfromthedownstreammachine.(LRIN[N0100423]:ON)
n
NOTE
• When the automatic operation signal (LR IN) from the downstream machine turns off during transfer of a board,
the machine stops temporarily carrying out the PC.
• When the board being carried out is detected by the exit sensor, the BA OUT signal turns off.
• Carrying out the board is nished when both the BUSY IN and BA OUT turn off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BUSY IN
(N0100420)
+24V
+24V
UR OUT(T01000E6)
LR IN
(N0100423)
+24V
LE IM
(N0100424)
BA OUT
(T01000E5)
Signal output during waiting
for board between machines
I/O BOARD
GND GND
14
11
12
7
4
8
3
1
Signal output during board
carry-in
Signal input to request board
carry-out
NEXT INTERFACE circuit
NEXT INTERFACE
connector
NEXT INTERFACE
AMP 206043-1
(14-pin receptacle)
This machine
Downstream machine
Signal input during automatic
operation
Signal output during automatic
operation
53A04-L4-00
n
Board transfer signal specifications
NEXTINTERFACE
Pin No. Signal name Address I/O specifications Signal specifications
1 +24V Input common (+24V)
Signal input during board carry-in
2 BUSY IN N0100420 Voltage input
3 BA OUT T01000E5 Relay contact (zero voltage) output
Signal output to request board
carry-out
4 BA OUT T01000E5 Relay contact (zero voltage) output
5 NC
6 NC (with dummy pins) (Prevents misinsertion.)
7 GND
8 NC
9 UR OUT T01000E6 Relay contact (zero voltage) output
Signal output during automatic
operation
10 UR OUT T01000E6 Relay contact (zero voltage) output
11 +24V Input common (+24V)
Signal input during automatic
operation
12 LR IN N0100423 Voltage input
13 +24V Input common (+24V)
Signal input during waiting for
board between machines
14 LE IN N0100424 Voltage input
A-5
Appendix
2. Warranty
The machine you have purchased is warranted against malfunctions as described below.
n
Warranty description:
Ifafailureorbreakdownoccursduetodefectsinworkmanshipormaterialsusedtomanufacturethismachinewithin
oneyearor5,000hoursofoperation(whichevercomesfirst)aftertheincominginspectioniscomplete,thenYAMAHA
willrepairthedefectivepartsfreeofcharge.
n
Warranty period
Thewarrantyperiodendswhenanyofthefollowingapplies:
1.Afteroneyearhaselapsedfromthetimeofinstallation.
2.After5,000hoursofoperation.
n
Items not covered by the warranty
Thewarrantydoesnotcoveranyofthefollowingconditions:
1.Damageasaresultofdeteriorationduetoageorwear(e.g.,normaldiscolorationofpaintedorplatedsurfaces,wear
ofreplaceableparts,etc.).
2.Incidentsassociatedwithsensoryperceptionswhichhavenobearingonthequalityorfunctionofthemachine(e.g.,
signalsoundsemittedbythecontroller,rotatingsoundsofthemotor,etc.).
3.Damagecausedbytheuserenvironment(e.g.,impuritiesintheairsupply,dust,debrisandoilmistinthemachine).
n
Exception to warranty repairs
Warrantyrepairswillnotbemadeifdamageiscausedbythefollowing:
1.Earthquakes,typhoons,floods,lightning,accidentsorfires,othernaturalorman-madedisaster.
2.ModificationsorconversionsnotapprovedbyYAMAHAoritsdealers.
3.Useofnon-genuineparts,greasesorlubricants.
4.Lackofpropermaintenanceandinspectionprocedures.
5.Maintenancehandledbysomeoneotherthantheapproveddealers.
6.Damageormalfunctionduetochangesinthemachineinstallationlevelthatmaybecausedbychangesinthe
foundationorsurroundingenvironment.
7.Themachinewasmodifiedorchangedinspecificationsaftertheincominginspectioniscomplete.
8.WhendefectivepartsreplacedfreeofchargewerenotreturnedtothelocationspecifiedbyYAMAHAorYAMAHA
salesrepresentativeswithin30days.
n
Note on network connections
ApreconditionfornetworkconnectionswiththeYAMAHAsurfacemountersandrelatedmachinesisthatsuch
connectionswillbeusedinclosednetworkscomprisedofaYAMAMHAsurfacemounter(orrelatedmachine)andanoff-
linePC.Thecustomermusttakeresponsibilityforconnectionstocompanyin-housenetworksandtoexternalnetworks.
PleaseacknowledgethatYAMAHAcanbearabsolutelynoresponsibilityfornetworksconfiguredbyotherthanjusta
YAMAMHAsurfacemounter(orrelatedmachine)andoff-linePCnorcanacceptresponsibilityforproblemsoccurring
duetonetworksettingsandconnections.
n
About USB memory devices
•UsetheUSBmemorydevice(suppliedwiththemachineorpurchasedfromYAMAHAsalesreps)specifiedby
YAMAHAMotorsCo.,Ltd.DonotuseanyothertypeofUSBmemorydevicewithYAMAHAsurfacemountersand
relatedmachines.AnyproblemsarisingfromusingotherthanthespecifiedUSBmemorydevicearenotcoveredby
ourwarranty.
•DonotconnectanyUSBdeviceotherthanthespecifiedUSBmemorydevicetotheUSBportonthemachine.Ifa
devicedriverforawrongdeviceisinstalled,thenthemachinemightnotworkcorrectly.Wetakenoresponsibilityfor
anyproblemscausedbyconnectingawrongorinappropriatedevice.
MAINTENANCE MANUAL
Apr. 2015
Version 2.10
© YAMAHA MOTOR CO., LTD. IM Operations
All rights reserved. No part of this publication may be
reproduced in any form without the permission of
YAMAHA MOTOR CO., LTD.
Information furnished by YAMAHA in this manual is believed to
be reliable. However, no responsibility is assumed for possible
inaccuracies or omissions. If you find any part unclear in this manual,
please contact YAMAHA or YAMAHA sales representatives.