00194547-09_InstallationManual_60103SP4_EN_DE.pdf - 第60页
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007 4.7.1.2 Setting the USB-CD drive as the boot drive 4.7.1.2.1 Setting the boot sequence Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility ===========…
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
4.7 Installing the machine controller on a CPU086 (SIPLACE X-series)
Unlike the CPU076, the CPU086 has no floppy drive. For this reason, BIOS updates, automatic
BIOS settings and installation of the RMOS have to be carried out with a CD using the USB CD
drive.
4.7.1 Installing the RMOS machine controller operating system
Note:
The following description refers to the "Phoenix FirstBIOS(tm)1.06" version of the BIOS.
Depending on the current version, it is possible that the structure of the BIOS menus, the
names of the submenus and the names of the settings may change.
The CDs mentioned below (RMOS installation, BIOS update and BIOS settings) can be created
from ISO images located on the installation CD for the station software. These images can be used
to create bootable CDs with suitable CD writing software on a PC with a CD writer. You should do
this before proceeding.
4.7.1.1 Preparing to install the RMOS on the machine controller
→ Create the RMOS installation CD (see ISO image on the station software CD).
→ Remove the keyboard from the station computer and connect it to the machine controller.
→ Switch the video multiplexer to SR2/MC.
→ Insert the CD in the USB CD drive and connect the drive to the machine controller using a USB
cable.
→ Press <Ctrl><Alt><Del> to warm start the machine controller.
→ During the warm start, press <Del>. The main BIOS Setup menu appears.
59 of 89
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
4.7.1.2 Setting the USB-CD drive as the boot drive
4.7.1.2.1 Setting the boot sequence
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
===================================================================
> Standard CMOS Features | > Frequency/Voltage Control
> Advanced BIOS Features | > Load Fail-Safe Defaults
> Advanced Chipset Features | > Load Optimized Defaults
> Integrated Peripherals | > Set Supervisor Password
> IMC Miscellaneous | > Set User Password
> Power Managment Setup | > Save & Exit Setup
> PnP/PCI Configurations | > Exit Without Saving
> PC Health Status |
Phoenix FirstBIOS(tm) Desktop CMOS
Advanced BIOS Features
Setup Utility
===================================================================
CPU Feature [Press Enter]
Virus Warning [Disabled]
CPU L1 & L2 Cache [Enabled]
Quick Power On Self Test [Enabled]
USB Flash Disk Type [Auto]
First Boot Device [USB-CD-ROM]
Second Boot Device [HDD-0]
Third Boot Device [Disabled]
...
4.7.1.2.2 Activating the USB interface
4.7.1.2.2.1 Activating the USB controller
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
===================================================================
> Standard CMOS Features | > Frequency/Voltage Control
> Advanced BIOS Features | > Load Fail-Safe Defaults
> Advanced Chipset Features | > Load Optimized Defaults
> Integrated Peripherals | > Set Supervisor Password
> IMC Miscellaneous | > Set User Password
> Power Managment Setup | > Save & Exit Setup
> PnP/PCI Configurations | > Exit Without Saving
> PC Health Status |
60 of 89
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
Integrated Peripherals
===================================================================
> OnChip DIE Device
> Onboard Device
> SuperIO Device
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
Onboard Device
===================================================================
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
…
4.7.1.2.2.2 Activating the USB interrupt
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
===================================================================
> Standard CMOS Features | > Frequency/Voltage Control
> Advanced BIOS Features | > Load Fail-Safe Defaults
> Advanced Chipset Features | > Load Optimized Defaults
> Integrated Peripherals | > Set Supervisor Password
> IMC Miscellaneous | > Set User Password
> Power Managment Setup | > Save & Exit Setup
> PnP/PCI Configurations | > Exit Without Saving
> PC Health Status |
Phoenix FirstBIOS(tm) Desktop CMOS Setup Utility
PnP/PCI Configurations
===================================================================
PNP OS Installed [No]
Reset Configuration Data [Disabled]
Resources Controlled by [Auto(ESCD)]
x IRQ Resources Press Enter
x IMA Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
Assign IRQ for USB [Enabled]
. . .
→ Save the BIOS settings and exit the BIOS Setup.
61 of 89