00194547-09_InstallationManual_60103SP4_EN_DE.pdf - 第87页
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007 87 of 89 4.8.8 Setup page "PC Health Status" This menu item is not available with Legacy Free. Menu item Comment Selection options Settin…
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
86 of 89
Menu item Comment Selection options Settings Comment
PCI INT A
PCI INT B
PCI INT C
PCI INT D
PCI INT E
PCI INT F
PCI INT G
PCI INT H
Assignment
With this setting, the BIOS can be instructed to assign a
defined IRQ to a PCI interrupt. A prerequisite for this is
that this IRQ is not set to Legacy ISA. When Auto is set,
the BIOS automatically assigns the IRQ.
Auto; 3; 4; 5; 7; 9;
10; 11; 12; 14; 15
Auto
Installation Manual, Station Software Version 601.03 SP4 Edition 05/2007
87 of 89
4.8.8 Setup page "PC Health Status"
This menu item is not available with Legacy Free.
Menu item Comment Selection options Settings Comment
Throttling
Temperature
This setting specifies the internal chip temperature at
which the processor automatically begins thermal
throttling.
110°C/110.00°C
115°C/115.00°C
120°C/120.00°C
110°C/110
.00°C
Ambient
Temperature
Shows the ambient temperature. - -
CPU
Temperature
Shows the CPU temperature. - -
4.8.9 Setup page "Frequency/Voltage Control"
In the "Selection options" column, the setting for fail-safe default is indicated in italics and the setting for optimized default is underlined.
Menu item Comment Selection options Settings Comment
Auto Detect PCI
Clk
If this function is Enabled, only CPCI slots which are also
occupied are clocked.
Enabled
Disabled
Enabled May switch
invisibly, as
specification
only applies to
internal bus 1.
Spread
Spectrum
If this function is Enabled, the average frequency of the
clock cycles generated in the clock synthesizer is
modulated within tight boundaries. This widens the noise
spectrum but lowers the amplitude.
Enabled
Disabled
Disabled