TR7500_Hardware_en.pdf - 第67页
66
65
6.6 X-Y TABLE ALARM
l XY TABLE: The Driver display can indicate if there is an error. If there is, then it is a
hardware error. Please refer to the Alarm code in the reference table and trouble shoot; if no
error is displayed, operate with EzLINK. If control is possible, then there is no problem with
the hardware and this could be a X-Y Table error caused by software. Please contact FAE
personnel. The confirmation procedure is as follows:
6.6.1 Check Driver Error Codes
l If LED is not showing this display, please press MODE button to switch.
66
67