00198596-02_JC_3M_C&P20P2M3_EN.pdf - 第22页
www.asm-smt.com
5 3-monthly C&P20 P2/M3 Clean / lubricate the Z-axis linear guide 6 min 5 / 5
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T7, T21-T23, T47, T77, T96-T98
Wear Part: Consumables:
C10, C22
www.asm-smt.com
25 If not OK loosen the 4 screws and proceed
with step 20.
www.asm-smt.com
6 3-monthly C&P20 P2/M3 Clean / lubricate the DP linear guide 15 min 1 / 3
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T22, T23
Wear Part: Consumables:
C10, C22
www.asm-smt.com
1 Prepare the multipette. See appendix
"Prepare the multipette.
2 Turn the wheel and adjust 2 µl. 3 Put the head stand in the upright position
and turn the head upside down.
4 Ensure the Z-Axis is moved into the head
before turning the star as otherwise the Z-
Axis jaw can be damaged.
5 Rotate segment 1 to the service window
and align it with the service mark to en-
sure the DP bearing sits properly in the Z-
axis jaw!
6 Move the Z-axis out of the head and hold
it there.