00198596-02_JC_3M_C&P20P2M3_EN.pdf - 第29页
7 3-monthly C&P20 P2/M3 Clean / lubricate the DP drive bearing 4 min 3 / 3 Refer to safety instructions in user manual before commencing Maintenance NOTICE! ESD guidelines are to be followed Tool: T21, T22, T24 Wear …
7 3-monthly C&P20 P2/M3 Clean / lubricate the DP drive bearing 4 min 2 / 3
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T22, T24
Wear Part: Consumables:
C13, C22
www.asm-smt.com
7 Clean the drive bearing and release the
segment.
8 Turn the star to the next segment. 9 Repeat step 6 to 8 for each segment.
10 Turn the star until segment 1 is in the ser-
vice window.
11 Push in the segment and hold it there. 12 Apply 1 x 1 μl to the gap of the bearing.
7 3-monthly C&P20 P2/M3 Clean / lubricate the DP drive bearing 4 min 3 / 3
Refer to safety instructions in user manual before commencing Maintenance
NOTICE! ESD guidelines are to be followed Tool:
T21, T22, T24
Wear Part: Consumables:
C13, C22
www.asm-smt.com
13 Turn the star to the next segment. 14 Repeat step 11 to 13 for each segment. 15 When segment 1 is in the service window
again turn the star 3 full rotations to dis-
tribute the oil.
16 Clean up the multipette. See appendix
"Clean up the mulipette".
www.asm-smt.com