00198705-01_AI_Portalmodularität_SX12_V3_DE_EN.pdf - 第86页
2 Brief Description 2.1 Overview 86 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 2.1.5.2 Empty Tape Duct Intermediate Plate If tapes with high components are pro…
2 Brief Description
2.1 Overview
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 85
2.1.5 Additional Work
2.1.5.1 Buffer Stopper
When upgrading a SIPLACE SX1 to a SIPLACE SX2 or downgrading to a SIPLACE SX1, always
replace the buffer stopper.
Fig.9: Buffer stopper
1. Location 1
2. Location 2
3. Safety switch
4. Long buffer on a SIPLACE SX1
5. Short buffer on a SIPLACE SX2
2 Brief Description
2.1 Overview
86 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
2.1.5.2 Empty Tape Duct Intermediate Plate
If tapes with high components are processed, you will need to remove the empty tape duct interme-
diate plate when upgrading a gantry with SIPLACE Twin or SIPLACE CPP head and stationary
camera.
If you are only using component with tapes up to 12mm, keep the intermediate plate in the empty
tape duct.
Fig.10: Tape duct
1. Inlet slot for empty tapes
2. Outlet slot for the empty tapes above the pneumatic tape cutter
3. Partition plate for tapes < 12 mm (can be removed for tapes > 12 mm)
2 Brief Description
2.2 Scope of Delivery
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 87
2.2 Scope of Delivery
●
Gantry carrier [00519814-xx].
The following gantry-head combinations and options are available for SIPLACE SX1 (SX+ Pre-
pared):
NOTICE
Scope of delivery
Since the retrofitting and therefore the delivery scope of gantries and heads is determined
via a configurator (SAP no. 588507 "Head and gantry configuration SIPLACE SXV3 from
R001 GigE"), the scope of delivery may vary according to the specific configuration.
Options for a gantry with C&P20 head (SpeedStar) Item no.
1 Nozzle changer C&P20 SX1/2 (position 1 or 2) – row 1 00519715-xx
1 Nozzle changer C&P20 SX1/2 (position 3 or 4) – row 2 00519843-xx
1 Verify component reject bin 00519848-xx
Options for a gantry with CPP head (MultiStar) Item no.
1 Nozzle changer CPP SX series (position 1 or 2) – row 1 00519841-xx
1 Nozzle changer CPP SX series (position 3 or 4) – row 2 00519842-xx
1 Verify component reject bin 00519848-xx
Stationary cameras (optional):
Component camera, stat. P&P (TYPE33) 55x45 GigE 03105198-xx
Upgrade kit for stationary camera type 33, SX V3 03225370-xx
Options for a gantry with TwinHead Item no.
1 Reject bin sensors 00519848-xx
Stationary camera:
SX V3 stationary camera P+P type 25 GigE 03222727-xx
NOTICE
BOMs for regular options
The BOMs for regular options can be found in the respective assembly instruction manuals.
NOTICE
Delivery state "Prepared" for gantry modularity
Your machine can be upgraded at a later stage with the prepared kit gantry modularity SX
V3 [00520562-xx]. Contact your SIPLACE Service team for details.