00198705-01_AI_Portalmodularität_SX12_V3_DE_EN.pdf - 第88页
2 Brief Description 2.2 Scope of Delivery 88 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 Prepared kit gantry modularity SX V3 [00520562-xx] Prepared kit gantry …
2 Brief Description
2.2 Scope of Delivery
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 87
2.2 Scope of Delivery
●
Gantry carrier [00519814-xx].
The following gantry-head combinations and options are available for SIPLACE SX1 (SX+ Pre-
pared):
NOTICE
Scope of delivery
Since the retrofitting and therefore the delivery scope of gantries and heads is determined
via a configurator (SAP no. 588507 "Head and gantry configuration SIPLACE SXV3 from
R001 GigE"), the scope of delivery may vary according to the specific configuration.
Options for a gantry with C&P20 head (SpeedStar) Item no.
1 Nozzle changer C&P20 SX1/2 (position 1 or 2) – row 1 00519715-xx
1 Nozzle changer C&P20 SX1/2 (position 3 or 4) – row 2 00519843-xx
1 Verify component reject bin 00519848-xx
Options for a gantry with CPP head (MultiStar) Item no.
1 Nozzle changer CPP SX series (position 1 or 2) – row 1 00519841-xx
1 Nozzle changer CPP SX series (position 3 or 4) – row 2 00519842-xx
1 Verify component reject bin 00519848-xx
Stationary cameras (optional):
Component camera, stat. P&P (TYPE33) 55x45 GigE 03105198-xx
Upgrade kit for stationary camera type 33, SX V3 03225370-xx
Options for a gantry with TwinHead Item no.
1 Reject bin sensors 00519848-xx
Stationary camera:
SX V3 stationary camera P+P type 25 GigE 03222727-xx
NOTICE
BOMs for regular options
The BOMs for regular options can be found in the respective assembly instruction manuals.
NOTICE
Delivery state "Prepared" for gantry modularity
Your machine can be upgraded at a later stage with the prepared kit gantry modularity SX
V3 [00520562-xx]. Contact your SIPLACE Service team for details.
2 Brief Description
2.2 Scope of Delivery
88 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020
Prepared kit gantry modularity SX V3 [00520562-xx]
Prepared kit gantry modularity SX V3 Item no.
1 NT upgrade kit SX V3 prep. gantry 2 03200805-xx
1 Positioning control for the gantry axes MGCU-3 03103477-xx
1 Carrier MGCU assy. 03228447-xx
1 Vision Base Interface (VBI) assembly. 03115474-xx
1 PCB trailing cable interface SX1/2 (GigE) assem. 03215039-xx
1 C-parts trailing cable interface support 03094645-xx
4 Label grounding point GNYE d12.5 00341997-xx
16 ISO 4762 - M 5 x 18-8.8-E2J 03080697-xx
1 Plastic case with foam insert 03081445-xx
1 Support for MGCU back assembly SX1/2 03122405-xx
1 Secondary section 03064172-xx
1 Cable set for gantry 2 SIPLACE SX12 03052290-xx
1 Cable set Full Mode SX12 03138304-xx
1 Support for trailing cable interface assy. 03220523-xx
1 GR Y trailing cable vacuum assy. 03220952-xx
2.2.1 SIPLACE C&P20P2 head
Designation Item no.
Placement head C&P20 P2 / without camera 03126608-xx
Component camera C+P (type 48) 8x8 GigE 03131695-xx
Upgrade kit C+P20P2/SX1/2 03224914-xx
Component reject bin up to 6x6for P001 03062378-xx
2.2.2 SIPLACE Twin P&P
Designation Item no.
TwinHead P&P/THK 03033629-xx
Basic set TwinHead, SX1/2 03079380-xx
Nozzle changer assembly / TH / B series 03062452-xx
Nozzle set, TwinHead 03019633-xx
Upgrade kit stationary camera type 33, SX V3 03225370-xx
2.2.3 SIPLACE CPP head
Designation Item no.
CPP placement head / without camera 03053528-xx
Standard component camera C+P ( type 30) 27x27 GigE 03101672-xx
Optional: component camera CPP (SST45) 15x15 GigE 03106380-xx
Upgrade kit CPP / SX1/2 03065864-xx
Component reject bin up to 6x6for P001 03062378-xx
Bin left 03063238-xx
2 Brief Description
2.3 Tools and Equipment Required
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V3 Gantry Modularity Portalmodularität 05/2020 89
2.2.4 Gantry
Designation Item no.
GR Gantry SX V3 03220742-xx
Gantry carrier SX1/2 03064450-xx
Transportation crate for SX gantry system 03079586-xx
2.2.5 Gantry carrier plate for SIPLACE SX1/SX2 [03012160-xx]
Amount Designation Item No.
1 Holder 03068900-xx
2 Anchor 03068901-xx
1 Distance plate 03016437-xx
2 DIN 6912-M8 x 40-A2-70 03046168-xx
8 DIN 125-A 8.4-140HV-A2 03045649-xx
8 DIN912-M8 x 20-A2-70 03045111-xx
2.3 Tools and Equipment Required
●
Gantry lift
WARNING
Installation
The installation can be performed manually, although we do recommend using a gantry lift
for safety purposes.
●
Torque wrench (2–25Nm) [00376625‑xx]
●
Loctite 241 [02101037-xx]
●
Prepared case (plastic case with foam insert) containing the following:
Prepared case
The case is configured differently depending
on the machine type.
1. Trailing cable protective foil
2. Buffer stop (2x)
3. Trailing cable mount
4. Pneumatic hose plug (4x)