SIPLACE S-23 HM.pdf - 第41页

User Manual SIPLAC E S-23 HM 1 Introduction, technical dat a Software Version S R.406.xx 02/00 US E dition 1.11 Overview of the modules - controls 41 1.1 1.4 T echnical dat a – component barcode reader 1 Fig. 1.1 1 - 2 C…

1 Introduction, technical data User Manual SIPLACE S-23 HM

1.11 Overview of the modules - controls Software Version SR.406.xx 02/00 US Edition

1.11.3.1 Controls on the input and output sides of the placement system

The controls on the input and output sides of the placement system perform identical functions.1

Emergency stop mushroom-head push-button and Start and Stop buttons 1

There is an emergency stop mushroom-head push-button, a Start button and a Stop button on

both the input and output sides of the PCB conveyor. This arrangement was adopted for the emer-

gency stop mushroom-head push-buttons because it enables them to be reached quickly and

easily from any position. 1

In addition, it is important to have an unrestricted view of the placement heads and placement area

during maintenance, servicing and setting up work in order to be able to check all the operations

carried out inside the machine. This particularly important during testing phases or when starting

single functions, for example. 1

Key switch 1

The key switch is located on the operating panel on the PCB output belt. It is only needed for set-

ting up and servicing work so, for reasons of efficiency, it is positioned near the Start and Stop

buttons. 1

Main switch 1

The main switch is part of the power supply unit, so it is positioned on the left-hand side of the

PCB input belt. It is located here because it is only needed for servicing and maintenance work

and is therefore not subject to frequent use. 1

1.11.3.2 Controls on the placement system console

Station computer, monitor and keyboard 1

The station computer, monitor and keyboard are all mounted on the console. They are arranged

so that any person who is at least 1.60 m tall can work comfortably and efficiently. 1

Component barcode reader 1

The two component tables for supplying components are arranged on the right and left of the

placement system. For this reason, the component barcode reader is also located in the central

console, since it enables the operators to work comfortably and efficiently during the component

set-up and filling checks. 1

User Manual SIPLACE S-23 HM 1 Introduction, technical data

Software Version SR.406.xx 02/00 US Edition 1.11 Overview of the modules - controls

1.11.4 Technical data – component barcode reader

Fig. 1.11 - 2 Component barcode reader

(1) Component barcode reader

Connected to Station computer

Data entry Via barcode scanner or keyboard

Number of characters Up to 40

Not permissible Barcodes starting with a 1 or 2

and less than 5 characters long

Number of barcodes Up to 6 per component

Filter for suppressing data Up to 1 per barcode

Preset code types Code 39 (standard or ASCII)

Code 2 of 5, interleaved and normal,

Code 128, UPC/EAN/JAN codes

(others available upon request)

1 Introduction, technical data User Manual SIPLACE S-23 HM

1.12 Overview of the modules - gantries Software Version SR.406.xx 02/00 US Edition

1.12 Overview of the modules - gantries

1.12.1 Position of the gantries

Fig. 1.12 - 1 Position of the gantries

(1) Gantry 1

(2) Gantry 2

The gantry system consists of two functional groups 1

–X-axis

–Y-axis