SIPLACE S-23 HM.pdf - 第412页

11 Station extensions / hardware User Manual SIPLACE S-23 HM 11.7 PCB data transfer Software Version SR.406.xx 02/00 US Edition 412 1 1.7 PCB dat a transfer 1 1.7.1 Functional description The ’Machi ne option s’ menu c o…

User Manual SIPLACE S-23 HM 11 Station extensions / hardware

Software Version SR.406.xx 02/00 US Edition 11.6 Feeder position recognition

411

11.6 Feeder position recognition

If the feeder modules are equipped with positioning fiducials, the fiducials can be measured.

If the "Conveyor position detection" function has been selected on the line computer, the function

will also appear in the Machine options. It can then be activated or deactivated at each station.

Fig. 11.6 - 1 Feeder position recognition

PLEASE NOTE 11

The "Feeder position recognition" function is always deactivated when the station is switched on. 11

If a track has been entered in the cluster data, the PCB camera on the feeder module will ap-

proach the position of the centering fiducial. Any centering fiducial offset determined during the

measurement will then be assigned to this track and added to the pick-up position during the pick-

up operation. 11

11 Station extensions / hardware User Manual SIPLACE S-23 HM

11.7 PCB data transfer Software Version SR.406.xx 02/00 US Edition

412

11.7 PCB data transfer

11.7.1 Functional description

The ’Machine options’ menu contains a ’PCB data transfer’ option. The aim of this function is to

increase the placement system’s performance on the line. To do this, an entire PCB is measured

at the

first

placement station and the associated fiducial, single circuit, ink spot, etc. data is deter-

mined, saved and sent to the next station. At subsequent stations, the data is then determined for

two fiducial positions only. These two fiducial positions are then used to correct the position for the

PCB to be processed at each station. It is thus not necessary to measure the entire PCB again,

together with its single circuits, ink spots etc. 11

11.7.2 Activating the ’PCB data transfer’ option

Fig. 11.7 - 1 Machine option: PCB data transfer

User Manual SIPLACE S-23 HM 11 Station extensions / hardware

Software Version SR.406.xx 02/00 US Edition 11.7 PCB data transfer

413

Å Click on the ’Machine options’ button in the basic view.

The ’Machine options’ window opens.

Å In the ’Options’ box, check the ’PCB data transfer’ option for the station concerned.

Å Click on the ’OK’ button. The ’PCB data transfer’ option is now active.

PLEASE NOTE: The ’PCB data transfer’ option can only be used in conjunction with a PCB bar-

code reader. 11