D3操作手册.pdf - 第24页

24 Comp onent Fee ding Compon ent Chan geover T able Technical Data Length x width 728 x 592 mm², 752 x 592 mm² (with waste contain er) Height 830 mm for 830 mm PCB transpor t height 900 mm for 900 mm PCB transpor t heig…

Location 1

Location 2

Location 3

Location 4

Component Feeding

Component Changeover Table

Description

Up to four component

changeover tables may be

docked in the machine.

Optionally, a matrix tray

changer may be installed at

location 2. The component

changeover tables are stand-

alone modules that can be

set up at an external set-up

area with feeder modules. In

this way, changes only inter-

rupt the production process

for a short time. The chassis

runs smoothly and is easy to

maneuver.

The component table has a

capacity of up to 15 locations

for 30 mm tape feeder mod-

ules. The total capacity with

four component changeover

tables is thus 180 x 8 mm

tracks.

Bulk case feeder modules,

linear vibratory feeders, Surf-

tape feeder modules, dipflux

modules, component dis-

posal modules and waffle-

pack trays can all be set up in

addition to the tape feeder

modules. Dummy feeder

modules are used at un-

assigned locations to protect

the operators.

The communication unit

sends the necessary voltages

and control signals to the

feeder modules.

The component feeders are

at rest during the placement

process, which means that

components can be refilled

(in sticks, for example) and

tapes may be spliced without

stopping the machine.

An optional component bar-

code reader can be used to

scan and check the barcodes

on the tape reels, thus guar-

anteeing that the compo-

nents are allocated to the

correct tracks.

Component Feeding

Component Changeover Table

Technical Data

Length x width 728 x 592 mm²,

752 x 592 mm² (with waste container)

Height 830 mm for 830 mm PCB transport height

900 mm for 900 mm PCB transport height

930 mm for 930 mm PCB transport height

950 mm for 950 mm PCB transport height

PCB transport height 830 mm ± 15 mm (standard)

900 mm ± 15 mm (option)

930 mm ± 15 mm (option)

950 mm ± 15 mm (SMEMA option)

Weight

without feeder modules

with feeder module at all locations

approx. 88.9 kg

approx. 143.7 kg

Reel diameter

standard

maximum

up to 432 mm (17“)

483 mm (19“)

Locations for feeder modules max. 15

Changeover time less than 1 min.

Component feeder table

Centering

Communication unit

Waste container

for pieces of used tape

Tape container

Component Feeding

S Tape Feeder Modules

Technical data

Packaging Model Loca-

tions

Transport

distance

Max.

CO height

Paper and

plastic

tapes

2 x 8 mm S

3 x 8 mm S

1 x 12/16 mm S

2/4 mm

2/4/8 mm

2/4 mm

4/24 mm

2.5 mm

0.7 mm

14 mm

Blister

tapes

1 x 24/32 mm S

1 x 24/32 mm S DP

1 x 44 mm S

1 x 44 mm S DP

1 x 56 mm S

1 x 56 mm S DP

1 x 72 mm S

1 x 88 mm S

1.5

2.0

2.5

3.5

4/40 mm

4/52 mm

4/68 mm

4/80 mm

4/96 mm

14 mm

24 mm

14 mm

24 mm

14 mm

24 mm

14 mm

Tape

reels

178 - 483 mm diameter (7" - 19")

Feeder

module

cycle

S feeder modules up to 20 mm transport distance

< 150 ms

a) Fiducial for feeder module

position recognition;

b) for 0201 and 0402 only;

c) variable in 4 mm increments;

d) DP = Deep Pocket.

2 x 8 mm S

3 x 8 mm S

3 x 8 mm S 0201

12/16 mm S

24/32 mm S

44 mm S

56 mm S

72 mm S

88 mm S

A cutting device automati-

cally cuts the used tape.

SIPLACE S feeders have short

cycle times and high-preci-

sion pick-up positions. Even

multiple products and small

batch sizes are easy to handle

since the feeder modules can

be quickly changed over.

Both the tape cycle incre-

ment and the use of tape

materials are variable.

SIPLACE S feeder modules are

suitable for both paper and

plastic tapes. This represents

a significant benefit in terms

of both cost and logistics.

When activated by a signal

from the communication

interface, the feeder modules

automatically control the

entire feeder sequence, in-

cluding automatic film tear-

off.

S feeder modules with the

additional designation DP

(Deep Pocket) transport com-

ponent tapes up to 25 mm in

height.

Description

The SIPLACE S feeder mod-

ules process component

tapes from 8 to 88 mm wide.

The feeder module reels are

kept in the tape container on

the component changeover

table.