D3操作手册.pdf - 第32页

32 Vision Sensor Technology PCB Position Recognition Technical data PCB fi duc ials Local f iducial s Library memo r y f. re cog- nition of bad panels up to 3 (subpane ls and multi ple panel s) up to 6 for the Long board…

Component Feeding

Matrix Tray Changer

Technical Data

Electrical ratings

Noise emissions

Permitted environmental factors

Supply voltage 3 x 400 VAC, 50 Hz (Europe)

3 x 208 VAC, 60 Hz (USA)

Total power 1.5 kW

Rated current 2.7 A at 3 x 400 VAC

4.2 A at 3 x 208 VAC

Fuses 3 x 16 A

Rated power consumption of the largest consumer 2 A

Maximum noise emissions 74 dB (A)

Room temperature between 15 °C and 35 °C

Atmospheric humidity 30 - 75 %

(No higher than 45% on average to prevent any possibil-

ity of condensation on the machine)

Vision Sensor Technology

PCB Position Recognition

Technical data

PCB fiducials

Local fiducials

Library memory f. recog-

nition of bad panels

up to 3 (subpanels and multiple panels)

up to 6 for the Long board option

(Optional PCB fiducials are output by

the optimization.)

up to 2 per PCB (may be of different

type)

up to 255 fiducial types per subpanel

Image analysis Edge detection method (Singular fea-

ture) based on grayscale values

Lighting method Front lighting

Fiducial recognition time 0.1 s

Field of vision 5.78 x 5.78 mm²

Camera’s field of view

Pixel

Ink spot, e.g. square

Evaluation window

Edge detection method

The size of the fiducial is pro-

grammed at the station com-

puter. From this time on form

and size of the fiducial is de-

fined and known. With these

data the PCB vision module is

able to search and recognize

the fiducial at the predefined

position on the PCB or ceram-

ic substrate without further

assistance. For this reason it

places several small evalua-

tion windows at the assumed

border of the fiducial. Within

these evaluation windows

the vision system looks for

contrast transitions between

bright and dark. After finding

such contrasts the actual

position of the fiducial can be

assigned by comparison with

the predefined – and thus

known – shape and size.

The analysis operations can

be used to determine any off-

set with respect to the DE-

SIRED position in the X and Y

directions and the angular

position.

Alternatively, a fiducial may

be taught as a pattern.

Additional functions of the

PCB vision module are recog-

nition of the position of the

feeder modules and ceramic

substrate (optional) and

recording of the machine

data including mapping.

The bad board detector

(GOOD/SCRAP scan) is also

moved over the ink spot

using the PCB vision module.

Description

SIPLACE has a number of

vision modules and a central

vision system to evaluate the

recorded image data ensur-

ing high placement accuracy.

At the machine's X-gantry

the PCB vision module is

mounted. It is used to find

the PCB's positioning-offsets

within the conveyor system.

This vision module is also

required to measure the

machine origin and/or the

feeder module positions on

one side of the table. Each

vision module consists of a

single CCD camera with inte-

grated lighting and optics.

The offsets in the position of

the PCBs are determined with

the help of at least two but

generally three reference

fiducials on the PCB. When

the PCB arrives at the place-

ment area the positioning

system with its PCB vision

module moves to the pro-

grammed fiducial.

The edge detection method

allows to choose predefined

fiducials from a menu (e.g.

cross, circle, square).

Vision Sensor Technology

PCB Position Recognition

Description

Different fiducial shapes

prove to be optimal depend-

ing on the condition of the

surface.

Particularly advisable for bare

copper surfaces with little

oxidation is the single cross.

Maximum accuracy is

achieved due to the high in-

formation content. Rectan-

gle, square and circle are less

“informative” but save space

and can even be used when

oxidation is at an advanced

stage.

Advisable for tinned struc-

tures are circle or square be-

cause in this case the ratio of

the fiducial dimensions to

the presolder thickness is

particularly favorable.

Fiducial criteria

Locate 2 fiducials

Locate 3 fiducials

X-/Y-position, rotation angle, mean PCB distortion

in addition: shear, distortion in X- and Y-direction separately

Fiducial shapes Synthetic fiducials: circle, cross, square, rectangle, rhombus, circu-

lar, square, and rectangular contours, double cross, any pattern

Fiducial surface:

copper

tin

without oxidation and solder resist

Warp ≤ 1/10 of structure width, both with good contrast to envi-

ronment

Dimensions of synthetic fiducials

min. X/Y size for circle and rectangle: 0.25 mm

min. X/Y size for annulus and rectangle: 0.3 mm

min. X/Y size for cross: 0.3 mm

min. X/Y size for double-cross: 0.5 mm

min. X/Y size for lozenge: 0.35 mm

min. frame width for annulus and rectangle: 0.1 mm

min. bar width / bar distance for cross, double-cross: 0.1 mm

max. X/Y size for fiducial shapes: 3 mm

max. bar width for cross / double-cross: 1.5 mm

min. tolerances, general: 2% of nominal dimension

max. tolerances, general: 20% of nominal dimension

Dimensions of patterns

min. size

max. size

0.5 mm

3 mm

Fiducial environment Clearance around reference fiducial not necessary if there is no

similar fiducial structure in the search area