D3操作手册.pdf - 第27页
27 Component Feeding Dummy Feeder Modules Danger To ensure that your SIPLACE placement mac hine runs safely, a feede r must be assigned to ever y location on the component changeover table. If you do not have enough feed…
26
Component Feeding
Bulk Case and Vibratory Stick Feeder Modules
for the CO Changeover Table
Technical Data
Bulk case feeder modules
a
Packaging form Bulk case
Feeder rails
Chip 0402, CO height: 0.35 mm
Chip 0402, CO height: 0.50 mm
Chip 0603, CO height: 0.45 mm
Chip 0603, CO height: 0.80 mm
Chip 0805, CO height: 0.45 mm
Chip 0805, CO height: 0.60 mm
Chip 0805, CO height: 0.85 mm
Chip 0805, CO height: 1.25 mm
Micro-Melf: 1.05 ± 0.05 mm
Mini-Melf: 1.4 ± 0.1 mm
Location 1 location for 2 different compo-
nent types
Vibratory stick feeder,
type 3
with control circuit
Number of tracks and width 3 x 9.5 mm
2 x 15 mm
1 x > 15 mm
1 x 30 mm
Location 1 location
a) Fiducial for feeder module position recognition
Description
The SIPLACE bulk case feeder
module processes bulk cases
on two tracks. It feeds rectan-
gular and round, passive
components. The PCB maga-
zines (bulk cases) are simply
replaced for refilling - with-
out stopping the machine.
The module essentially con-
sists of the basic element plus
two feeder rails and PCB mag-
azines to suit the component
type and height. The compo-
nents are separated and fed
along the rails by compressed
air.
The principle of the fixed
component table has proven
its worth, even when bulk
cases are used: the vibrations
that can occur with other
placement machine concepts
can have a highly detrimental
effect on the component
quality due to abrasion, for
example.
Even with stick magazines,
the stationary component
supply has significant advan-
tages: the universal vibratory
stick feeder can be topped up
during placement.
Bulk case feeder module
Vibratory -
stick feeder, type 3
27
Component Feeding
Dummy Feeder Modules
Danger
To ensure that your SIPLACE
placement machine runs
safely, a feeder must be
assigned to every location on
the component changeover
table. If you do not have
enough feeder modules,
then you should use dummy
feeder modules as space
holders.
The following dummy feeder module variants are available for
component changeover tables:
SIPLACE dummy feeder module for 1 location
SIPLACE dummy feeder module for 6 to 10 locations
SIPLACE dummy feeder module for 11 to 20 locations
Dummy feeder module for 1 location
Dummy feeder module for
6 - 10 locations
Dummy feeder module for
11 - 20 locations
28
Component Feeding
Waffle-Pack Tray Holder
Description
The waffle-pack tray holder is
a device for holding JEDEC
trays used to supply compo-
nents. The holder is placed
on the component table like
a feeder module and the
waffle-pack trays are
changed manually.
The tray holder set-up is rec-
ommended if there are just a
few component types to be
placed from a waffle-pack
tray.
Technical data
Waffle-pack tray holder for large waffle-pack trays
Dimensions (LxWxH) 425 x 264 x 113 mm³
Locations filled on the
component table
9
Possible positions Locations 2 and 4
Software
Station software
Programming system
SR.602.xx or later
SIPLACE Pro 3.0 or later
Range of placement heads TwinHead, C&P6, C&P12
Waffle-pack tray holder for small waffle-pack trays
Dimensions (LxWxH) 425 x 140 x 113 mm³
Locations filled on the component
table
5
Possible positions Locations 2 and 4
Software
Station software
Programming system
SR.602.xx or later
SIPLACE Pro 3.0 or later
Range of placement heads TwinHead, C&P6, C&P12
Waffle-pack tray holder