D3操作手册.pdf - 第41页
41 Technical Data Electrical Connecti on, Interfaces and Compressed Air Connection Compress ed air conn ectio n SMEMA / SI EMENS interface PC and LAN connec tion Powe r conn ecto r 5 x 6 mm² cable with CEKON plug 5 x 32 …
40
Technical Data
Electrical Ratings and
Compressed Air Supply
Electrical ratings
Supply voltage 3 x 208 VAC ± 5 %, 50/60 Hz (U.S.A. version)
3 x 230 VAC ± 5 %;50/60 Hz
3 x 380 VAC ± 5 %;50/60 Hz
3 x 400 VAC ± 5 %, 50/60 Hz (European version)
3 x 415 VAC ± 5 %;50/60 Hz
Fuses 3 x 32 A (3 x 208 VAC / 3 x 230 VAC)
3 x 16 A (3 x 380 VAC / 3 x 400 VAC / 3 x 415 VAC)
Nominal apparent power 4.1 kVA
Rated current consumption 9.7 A / 3 x 400 VAC
Power failure max. 20 msec
Compressed air supply
Compressed air ratings
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Compressed air connection 3/4" thread with 1/2" hose connection
Compressed air consumption with 4 tape
cutters
2 x C&P12/TH 550 st. l/min
300 st. l/min with vacuum pump
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Compressed air specification
Particle size 0.1 μm
Particle density 0.1 mg/m³
Maximum oil content (class 1) Particle density 0.01 mg/m³
Pressure dewpoint (class 4) Dewpoint + 3°C
41
Technical Data
Electrical Connection, Interfaces and
Compressed Air Connection
Compressed air connectionSMEMA / SIEMENS interface
PC and LAN connection
Power connector
5 x 6 mm² cable with CEKON plug 5 x 32 A (3 x 208 VAC / 3 x 230 VAC)
5 x 4 mm² cable with CEKON plug 5 x 16 A (3 x 380 VAC / 3 x 400 VAC / 3 x 415 VAC)
42
Technical Data
Dimensions and Set-up Conditions
Length
with both extension kits
with one extension kit
with no extension kits
2380 mm
2103 mm
1826 mm
Width of the basic machine
with CO changeover table (locations 1 + 4)
with CO changeover table (locations 2 + 3)
including monitors
with keyboards
2815 mm
2395 mm
2766 mm
2804 mm
Height of the machine
with warning lamp
with protective covers folded up
max. 1863 mm
1990 mm (PCB conveyor height 830 mm)
2060 mm (PCB conveyor height 900 mm)
2090 mm (PCB conveyor height 930 mm)
2112 mm (PCB conveyor height 950 mm)
Machine ground clearance 120 mm (PCB conveyor height 830 mm)
190 mm (PCB conveyor height 900 mm)
220 mm (PCB conveyor height 930 mm)
240 mm (PCB conveyor height 950 mm)
Weight
Basic machine with 4 CO changeover tables
Full configuration with feeder modules
3790 kg
4153 kg
Footprint 6.70 m²
Load per unit area
a
5.83 kN/m²
Number of machine feet 6
Maximum noise emissions 74 dB (A)
Room temperature between 15 °C and 35 °C
Atmospheric humidity 30 to 75 % (no higher than 45% on aver-
age to prevent any possibility of conden-
sation on the machine)
a) The load per unit area calculation included an additional working space of 0.5 m on each side
of the machine. Further data available on request.