00198481-01_Technical_Training_E_by_DEK_EN.pdf - 第12页
2 Basic Machine Overview 2.2 Basic Machine Overview 12 Technical Training E by DEK 12/2017 2.2 Basic Machine Overview 1. Tricoloured beacon 5. Right jog button 2. System button 6. Mains isolator 3. Monitor 7. Emergency S…
2 Basic Machine Overview
2.1 Machine - Introduction
Technical Training E by DEK 12/2017 11
2 Basic Machine Overview
2.1 Machine - Introduction
The E by DEK series print machines offers all the innovations and features to ensure efficient,
productive, and reliable printing.
With its non-touchscreen, keyboard and trackball operation, graphical interfaces, multiple
languages and integrated video-based help, the DEK Instinctiv software supports the easy, quick
and error-free operation of the E by DEK printer.
Machine - Series Specifications (excerpt)
Specification details Value
System Alignment Capability * > 2.0 Cmk @ +/- 25μm, (±6 Sigma)
Standard Cycle Time 11 secs
Squeegee Pressure
Mechanism*
●
Software controlled, motorized with closed loop feedback
Under Stencil Cleaning
●
Interchangeable Under Stencil Cleaner (IUSC), fully
programmable with wet/dry/vacuum wipe
For detailed specification see the machine specification.
2 Basic Machine Overview
2.2 Basic Machine Overview
12 Technical Training E by DEK 12/2017
2.2 Basic Machine Overview
1. Tricoloured beacon 5. Right jog button
2. System button 6. Mains isolator
3. Monitor 7. Emergency Stop button
4. Keyboard 8. Left jog button
2.3 Overview main components
Squeegee
Device, usually rubber or metal used to
distribute printable material across and through
the screen during the print cycle.
Under Screen Cleaner
The underscreen cleaner module automatically
cleans the underside of the screen so reducing
the build up of paste.
No different versions available. Options are No
USC or Interchangeable only.
2 Basic Machine Overview
2.3 Overview main components
Technical Training E by DEK 12/2017 13
Camera Module
The camera system contains the following
camera:
●
Hawkeye 750
Conveyer System
Standard is single Conveyor Fixed rail outer.
Screen Mount
The Screen Mount is the receptacle for the
stencil during printing operations.
Different versions are available.
Other hardware options
Board Support Tooling Basic manual plate options for:
●
Support tooling
●
Vacuum tooling
●
Grid-Lok Tooling
●
Support pillars
Roll Height Monitor To check and control the paste height
Stinger Stinger is a glue dot dispenser module attached to the camera
carriage
See the machine technical reference manual for a full list of options and further details.