00195374-0202_AI_LBO-D1D2_DE+EN.pdf - 第43页
Long bo ard option 2 Assembly instructions Long board op tion SIPLACE D1 / D2 06/2007 Edition 43 : Remove the cover over the conversion board (6 screws) beneath the output conveyor belt. Cover 2 2 2 2 2 2 2 2 2 2 2 2 2 2…
2 Assembly instructions Long board option SIPLACE D1 / D2 Long board option
06/2007 Edition
42
: Unscrew the sonar sensor until the distance from the fixing bracket to the end of the sonar sen-
sor is 38 mm.
: Fix the limit switch actuator to the moving conveyo
r side wall using two screws (2x M6 x 25
screws) as shown in the picture.
Moving conveyor side
wall on the left without
limit switch actuator
Limit switch actuator,
moving conveyor side
wall on the left
2
2
2
2
2
2
2
2
2
Long board option 2 Assembly instructions Long board option SIPLACE D1 / D2
06/2007 Edition
43
: Remove the cover over the conversion board (6 screws) beneath the output conveyor belt.
Cover
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 Assembly instructions Long board option SIPLACE D1 / D2 Long board option
06/2007 Edition
44
: Run the cable and hose (or 2 cables, 2 hoses on the DC) without bending through the opening
on the left-hand side beneath the conveyor width adjuster to the conversion board.
Cable gland
Cable gland
Air connection
2