YG200_200L_E.pdf - 第39页

1-11 1 Part names and functions n Feeder plate layout Typ e L ay o u t S e t N o . H e a d N o . A B C D Y G 2 0 0 1 20 21 40 140 121 120 101 A B C D 1 1 t o 2 0 2 6 t o 4 0 10 1 t o 12 0 12 6 t o 14 0 2 1 t o 1 9 2 5 t …

100%1 / 101
1-10
1
Part names and functions
4. Component supply section
Components or parts are supplied from tape feeders installed on a feeder plate or from an external tray
changer or tray stacker. Under each feeder plate in the feeder setup section, power supply connectors and
air connectors are provided for driving optional units.
4.1 Supplying components from feeder plates
4.1.1 Fixed feeder plates
Tape feeders, bulk feeders and stick feeders are installed on the feeder plates, and operate by air supplied from
the mounter.
Feeder drive air outletFeeder plate
Power supply connector
Air connector
Feeder plate
Example of YG200
23110-M2-00
Power supply connector
When using optional units such as stick feeders, plug the power cord into this connector.
Air connector
When using optional units such as stick feeders and air gun, connect the air tube (O.D. 4mm) to this air connector. Air is
supplied from the mounter to the connected unit. The feeder plate layout and set numbers differ depending on the
machine specifications. Typical feeder plate layouts are shown below. Some feeders cannot be reached by a head
depending on the head assembly configuration and X-axis movement range. The tables below show feeder set numbers
that can be accessed by each head.
1-11
1
Part names and functions
n
Feeder plate layout
Type Layout
Set No.
Head
No.
A B C D
YG200
1
20
21
40
140
121
120
101
A B
CD
1 1 to 20 26 to 40
101 to 120 126 to 140
2 1 to 19 25 to 40
101
to
119
125 to 140
3 1 to 18 24 to 40
101 to 118 124 to 140
4 1 to 17 23 to 40
101 to 117 123 to 140
5 1 to 16 22 to 40
101 to 116 122 to 140
6 1 to 15 21 to 40
101 to 115 121 to 140
YG200L
1
24
25
48
148
125
124
101
A B
CD
1 1 to 24 28 to 48
101 to 124 128 to 148
2 1 to 24 27 to 48
101 to 124 127 to 148
3 1 to 24 26 to 48
101 to 124 126 to 148
4 1 to 23 25 to 48
101 to 123 125 to 148
5 1 to 22 25 to 48
101 to 122 125 to 148
6 1 to 21 25 to 48
101 to 121 125 to 148
1-12
1
Part names and functions
4.1.2 Feeder exchange carriage
The feeder exchange carriage allows feeder setup in advance for the next production boards. The feeders on
the feeder exchange carriage can be changed at one time.
n
Feeder exchange carriage
Feeder exchange carriage
1
2
5
4
6
3
23111-M2-00
1 Handle
Use this handle to move and position the feeder exchange carriage.
2 Feeder plate
Up to 20 or 24 tape feeders (8mm tape feeders) can be installed on this feeder plate.
3 Vertical clamp bolts
If necessary to adjust the feeder plate height, loosen these bolts and change their clamping positions by turning the
height adjustment bolt 6 to match the mounter height.
4 Empty tape dump box (option)
This box is for catching empty tape after components have been picked up.
5 Empty tape dump box holder
This holder prevents the tape dump box (option) from falling.
6 Height adjustment bolt
After loosening the vertical clamp bolts 3, turn this bolt to adjust the feeder plate height to match the mounter height.